20 Most Recent 1968 AMC AMX Questions & Answers

can all the mounts/ motor and transmission too..if all is ok I would need more info, I have AMC'S for more than 20+ yrs and still do

I have a shop manual for this year car [email protected]

generally speaking we look for 30 degrees dwell,but setting the point gap at 18 thousands of an inch work well,then adjust the timing. dwell changes timing but timing does not change dwell,so adjust the points first then set the timing

It came with an inline 6 cylinder engine.

sadly amc has been out of business for more than 50 years here noone will ever find parts

http://autofinancedirect.co.nz/dealer-locator Try this link.

The smallest engine was a 232 hp engine and a top speed was 100 mph in theory.

6 cylinder 195.6 cid with 127 hp 8cylinder 287.2 cid with 200 hp

154km or 96 mph

about 2 degrees at 500 rpm

The 6 cylinder had about 120 hp while the 8 cylinder had about 130 hp

The best solution you'll get from books at www.reliable-store.com These are books containing info on repair, service, troubleshooting, parts info, assembling dis semble, removal, error/fault cod es, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc

The best solution you'll get from books at www.reliable-store.com These are books containing info on repair, service, troubleshooting, p arts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicle- cars, atv, trucks. forklifts, boats, excavators etc.

I tried the DIY service and repair manuals from a website and it actually helped me repair transmission problem in my jcb 3cx site-master. it wont move forward or reverse, engine is good both solenoids for forward and reverse work. I don't have much technical knowledge but I just followed it step-wise, and works perfect! got it from www.reliable-store.com