20 Most Recent
2012 Fiat 500 Questions & Answers
How do you reset the 2012 Fiat 500 oil sensor
With all doors closed, put key in ignition and turn key to first position only, and fully depress and release the accelerator pedal 5-7 times. Pedal must be pressed all the way down and fully released these 5-7 times. I hope this helps!
Fiat 500c stuck in "phone"mode. How do I reset so the audio works?
With the key off, remove the radio fuse from the fuse box, start the car (there should be no power to the radio if you got the right fuse pulled), turn turn the car off, then then put the fuse back in. That should reset it.
In my 2013 Fiat 500 it's the 3rd fuse up from the bottom, on the left side of the bus. 10amp, red fuse. (If you're unsure, use the web to look up a map of the fuses for your make\model\year. Don't justt start unplugging fuses... you may strand yourself.) -Good Luck!
Why am i getting low memory signal on my 2012 fiat 500?
Rolly: According to Fiat500USAforum.com: "What is causing your problem is the Ecodrive program. You can disable this using the Voice Response system I think the command is Ecodrive disable...but you might want to check the owners manual. I used the system with a thumbdrive, but lost interest and turned it off using the VR button on the steering wheel and voice commands. "
Not finding what you are looking for?