2013 Hyundai Elantra - Answered Questions & Fixed issues

This issue sounds like it could be related to a problem with the ground connection or the reverse gear sensor in your 2013 Hyundai Elantra. The radio may be losing power when the reverse gear is engaged and the car is on a hill, causing it to cut off and then come back on. Here are some things you can try:

1. Check the ground connection for the radio. Make sure it is tight and securely connected.
2. Check the wiring for the reverse gear sensor. Make sure it is properly connected and not damaged.
3. Inspect the reverse gear sensor itself to make sure it is not malfunctioning.
4. Check the voltage of the battery, low voltage can cause the system to shut off
5. If none of these solutions work, it is recommended to have your vehicle inspected by a professional mechanic.

It is also important to have a professional diagnose this issue as it could be caused by multiple other electrical issues and a proper diagnosis is needed to find the root cause and prevent further damage to your vehicle.

Check the following , faulty plug lead , faulty spark plug , faulty fuel injector ,vacuum leak number 3 manifold , burnt out valve compression test .

Videos here https://www.google.com/search?q=2013+hyundai+elantra+clutch+adjustment ..

Very Possible it is your fuse, the only thing that makes me think otherwise is that your problem is intermittent. When a fuse blows, things stop working they do not work intermittently. If you recently installed a stereo, check the harness for crossed connections or exposed wiring that may be causing a short. When you blow the fuse for the stereo it usually takes out many of the interior electronic accessories such as Interior dash lights, electronics door locks, dome lamps, etc. Check the fuse box likely under the dash, if not in a corner of the engine compartment under the hood and find the diagram for the fuse lay out. Check the fuse for the stereo or interior accessories or for the door locks. problem could be with the wiring for either.

If you have a bad light bulb it will make the blinker light flash. Check all turn signal light bulbs.

common issue. It either needs to be reflashed from the dealer or replaced. Sorry for the bad news.

Why not take it to the dealer ? Still under warranty !

That is the TPMS warning (tire pressure monitor sensor). Check your tire pressure. The light/symbol is actually supposed to look like a flat tire.

most cabin air filters are located behind glove box. some are located under hood. local auto shop may be able to show you in diagram.

Hi they are usually under the center console near park brake lever. Or forward from that under the dash look for a small metal box with yellow cables going in to it. Good Luck

Check for a drivers door over ride lockout switch or it may be on the centre console that locks out the passengers from playing with their controls. If this is not the problem or cause let us know so others can keep thinkng about a solution for you please.

If you have a second key, try that one. Sometimes 1 key will unlock, 1 key will start. If not it would be the anti theft or security system disabling the ignition module. Which is why it won't even try to turn over.

Unbolt

Question edited for clarity, correct spelling of model. Question moved to model category. It could be so many things. Find a local auto-electrician, a professional grade scan tool computer will diagnose all the electronics computers, modules and sensors in 30 minutes. https://www.google.com/search?q=auto+electrician+near+me ..

some cars the dash has autodimmer a sun sensor on the dash some can be disabled , so read the users guide to do that. most cars, we can disable the out dim in the free users guide, search word DIM. bingo,? see on,off ,up ,down or auto?> find the top of dash sun sensor shine a very bright light there, and dash DIM goes full bright, if yes, bingo see the users guide in the glove box yet page 5-42 is your answer see the words obstructs either sensor bingo it is in your manual this. https://www.carmanualsonline.info/hyundai-elantra-2022-owners-manual/?srch=dim

This usually indicates a problem with the transmission control module (TCM). You should have a qualified mechanic inspect and diagnose the problem, as it could be something as minor as a faulty TCM or something more serious such as a transmission failure. Replacement of the TCM or other components may be necessary to fix the issue.

My 2005'hyundia Tuscan no ac no heater no defrost new blower motor and new resister still nothing

buy the shop manual and read. or online at mitchill1 diy, do com, pay $20 like we all do, what is this, no one problem stated , did you mean the truck hatch springs failed, what? install trunk torsion

a car.all cars made have service manual. every one.and all that is covered even a 3 inch think book.why not buy one from maker.or tell what country you are in .cars are not the same at all , in all countriessome have 5 or more engines choices and transmissions.check out Europe to learn that.nor did you say what is to be worked on, to torque.buy the book or if in USA read it here, at mitchell1 DIY onlinehttps://eautorepair.net/Marketing/Default.aspbuy the book at the dealerpay on line or google all week long.

Question edited for clarity to get rid of all the abbreviations. The code P2626 won't go unless you do some corrective work to the Heated Oxygen Sensor and associated wiring. https://www.google.com/search?q=2007+Hyundai+Elantra+GLS+code+P2626 videos as well https://www.google.com/search?q=2007+Hyundai+Elantra+GLS+code+P2626 ..