20 Most Recent 2013 Hyundai Tucson Questions & Answers

if you have less than 100k on it return it to dealer , it is more than likely the oil control valve , it is covered by warranty, mine was doing it and that fixed the problem

replace fuel float

Trunk release lever inside front door by the gas cap lever!

If check engine light not on steady.... May be hard to find problem> One thing to look for is throttle plate coking/dirty.This will cause a problem with the base idle and cause stalling at stop lights and while slowing down. Have throttle plate cleaned and decarbed if it looks dirty

call and ask the dealer about the codes or go to autozone they check the codes for free.

There is no fuse for the interior lights. It is likely to be the bulb or the door switch. The second Page link shows locations.

2005 Hyundai Tucson fuse box diagram

StartMyCar https://www.startmycar.com > Tucson > Fuse box 2005 Hyundai Tucson fuse box diagram. The 2005 Hyundai Tucson has 2 different fuse boxes: Engine Compartment diagram. Inner Panel diagram.

Hyundai Tucson (JM; 2004-2009) fuses and relays

Fuse Box Diagrams https://fuse-box.info > hyundai > hyundai-tucson-jm-2... Here you will find fuse box diagrams of Hyundai Tucson 2004, 2005, 2006, 2007, 2008 and 2009, get information about the location of the fuse panels inside ... You've visited this page 2 times. Last visit: 2023-08-01

Hyundai Tucson 1 (ix35) - fuse and relay

FuseAndRelay.com https://fuseandrelay.com > hyundai > tucson-1 It is located in the left end of the dashboard, behind the protective cover. ... The fuses designated as C / LIGHTER or P / OUTLET are responsible for the ... You visited this page on 2023-08-01. ..

The mechanism of a reclining driver's seat in a car can be complex, and it may require specialized tools and knowledge to diagnose and fix the problem. Depending on the cause of the issue, it may be possible for you to fix it yourself if you have the necessary skills and tools, but if you are not experienced with automotive repairs, it may be best to take the vehicle to a professional mechanic. Before attempting any repairs, you should consult the owner's manual for your vehicle to understand the seat mechanism and any safety precautions you should take. If the problem is related to a broken part or a loose connection, you may be able to fix it by yourself with some basic tools. However, if the issue is more complex or requires a replacement part, it may be best to take your vehicle to a professional mechanic or an authorized Hyundai dealership for repair. They will have the expertise and experience to diagnose the problem and repair the seat mechanism correctly and safely.

The problem is with the fuel system or possibly the fuel pump. Try checking the fuel pressure and ensuring enough fuel gets to the injectors. If the fuel pressure is adequate, but the injectors are not pulsing, you may need to replace them or have them professionally cleaned. If the fuel pressure is too low, then check the fuel pump and its related components

https://www.mahle-aftermarket.com/media/local-media-north-america/pdfs-&-thumbnails/torque3.pdf

https://www.youtube.com/watch?v=u1IA6hgM40E Seems like they have a lot of problems. This video may help you.

Tucson has this notorious problem. The door locks operate using a steel cable, just like the clutch cable of most of the motorcycles. This cable stretches out with time and eventually, the throw of the lock (the range of motion) would not be enough to pull the cable sufficiently and unlock the cars. On youtube, you'll find some fixes which basically suggest to cut the stopper in the lock mechanism to increase the throw length of the lock latch.

clutch on compressor.

When it is serviced at your Hyundai Dealership, mention the noise and as it is under warranty, they will sort it out for you.

I wouldn't have thought it would run without a MAP sensor! Here are some videos, but if he cut the wires and connectors, you aren't going to have much luck. Videos on replacing it here. https://www.google.com/search?q=2007+HYUNDAI+TUCSON+replace+MAP+sensor ..

While there are a variety of reasons your Hyundai Tucson is overheating, the most common 3 are a coolant leak (water pump, radiator, hose etc.), the radiator fan, or a failed thermostat.

no info generic answer have scanned for trouble codes ---check fluid level and condition

"Pressure sensor" as in oil pressure sensor, Manifold pressure sensor, exhaust pressure sensor? Year model and engine?

If the oil-change light does not go away after service, carry out these steps to reset it: 1. Put the ignition in "ON" position 2. Use the menu on your speedometer 3. Push the button on your steering and get to the 'Service Required' menu 4. Hold the "OK" button to reset. The light should go away now.