20 Most Recent
2008 Chevrolet Malibu Hybrid Questions & Answers
Need to install lighting harness to tow my 2008 Malibu with RV
The tail lamps will have to be removed first of all. You will need a test light to check all wires to see which one is for what usage. Have a friend to operate the switches inside while you test each wire and mark the wires with tape for what they are used for. Signal lamps must be marked for which side. Brake lights make no difference as so for back up lamps. The directions are incorporated with the 4 way flashers
Hi how to set a timing belt tensioner pulley when replacing 2011 Chevrolet aveo
Tensioner pulleys are designed to be 'Self Adjusting'. These pulleys are on spring loaded arms so they automatically push against the belt keeping it tight. You use a socket or a spanner to swing the pulley arm back against this spring.
*Note* This is a powerful spring so BE CAREFUL when your working on it!
A lot of these tensioners have two small holes to help with installing a belt. When you swing the tensioner arm back these two holes line up with each other. You can then slide a hex key, or something similar, through both holes and it holds the arm back giving you space to get the belt on.
*Caution* When your ready to release the tensioner DO NOT just pull the hex key out!! With the socket or spanner you used to swing the tensioner arm back push the arm against the spring again, carefully pull the allen key out then Carefully release the pressure on the spring so the pulley sits correctly and tensions the belt.
Not finding what you are looking for?