2009 Volvo XC90 - Answered Questions & Fixed issues
How do Iopen bonnet
this picture doesn t pick it up how its released
why no cable or button release inside within the driver reach
5/27/2016 11:45:21 AM •
2009 Volvo XC90
•
Answered
on May 27, 2016
•
65 views
I have xc90 d5 there
Hi,
This is probably due to a problem with the swirl flap actuator arm - if you remove the top of the engine cover (the plastic bit) and look at the top, left front of the engine, do you see a plastic arm (approx 70 - 100 mm long) disconnected?
Regards,
RK
6/20/2013 7:31:55 PM •
2009 Volvo XC90
•
Answered
on Jun 20, 2013
•
3,123 views
Replace McPherson strut
have to take the wheel off then need a special tool to compress the strut so you can seperate the ball joint from the control arm. then take out the two bolts holding the strut to the spindle. then take out the three bolts holding the strut in the engine bay
7/4/2010 4:54:49 PM •
2009 Volvo XC90
•
Answered
on Jul 04, 2010
•
237 views
Volvo xc90 headrest removal
You have to feel from the back of the seat push trough the leather and feel for the detents. You can do one side at a time. Put your hand under the head rest and apply pressure upwards as you push in the detent with the other hand. Its no fun. one you get past both detents it just slides up.
I installed many tv systems when i was a volvo tech.
4/13/2010 7:14:11 AM •
2009 Volvo XC90
•
Answered
on Apr 13, 2010
•
2,146 views
Volvo 2006 xc90 radiator removal
Headlights come out first, then the bumper cover/grille, then the core support. Big bolts go up from underneath. There is a youtube video on engine removal that will show radiator removal also.
Need diagram 2005 volvo xc90
I did a Youtube video that shows the exact location of the chain and timing marks for the Volvo 2005 XC90. https://www.youtube.com/watch?v=OPEJAXmYZ8U&feature=youtu.be
Not finding what you are looking for?