There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few like reliable-store .. let me know if u need help
thanks
A stoat is a small weasel. Do they have signal lights for them where you live?
Do you have a check engine light? Or any kind of advisory light (check gauges, etc)? If so, this information should be included with your question. Recommend you bring your Nissan to a qualified mechanic and explain what's happening and have them troubleshoot and correct your issue.
If you think you want to correct it yourself, please resubmit your question and provide details. Check engine light on/off, any codes. When it quits, can you restart it right away. If not, are you getting spark and fuel. Without information like this, no one can tell you what's wrong and what to do to fix it.
Not sure which item you are talking about?? If you mean the blower for heat system it is under dash behind a cover. If you are talking about a radiator cooling fan it is behind radiator and requires removing a few bolts at top of radiator support - unplugging the wire to fan unit (push in tab on wire bundle and pull apart), and then lift fan unit up and out. You may have to remove plastic cover, and upper radiator hose to lift out, but fan is usually just held in at top by bolts and sits in rubber footings at bottom.
Nissan cars with keyless entry will display key on dashboard display if battery of key runs out. Normally it can be resolved by replacing the battery. See video above.
Emergency Start: There is a way to start the car in case of emergency. If you don't have access to new battery then you can start the car by pressing the button with your key FOB. There is a sensor in your key below Nissan logo which should be kept near the Start-Stop button when pressing it. This should work even if there is no battery in the key. You can give it a try.
This sounds weird but check that the spark plug wires are not touching one another and they are all neatly run and in there clips and not crossed over to where another wire is, kinda like an X.
Give it a try it worked for me. Good luck