Nissan 240SX - Recent Questions, Troubleshooting & Support
240 crank problem
Starter motor or solenoid is going bad or cables are corroded. Clean all cables if car does not crank have someone try to crank it while you "smack" the started motor housing with a hammer or a long solid rod (hitting the rod with the hammer as it rests on starter motor case). Hit it sharply a few times. If it starts, then the starter motor is bad.
I have a 1993 Nissan
most likely a clutch master cylinder ( or cable )
take it to an accredited professional clutch and brake shop
I have a 1997 240sx
Yes, remove the switch and test with an ohmmeter.
the run wire is brown/red.
1991 Nissan 240sx Ka24de dual
You will need to flush the steering system and then replace the steering rack and pinion assembly to cure this issue.
Stalls at lights, sounds like it is chugging air like a tractor.
try this simple test
start the car and hold at around 1000 rpms until the engine warms up
now place it in gear with the handbrake on ( don't touch the foot brake
if it is idling at around 800 rpms and is smooth, apply the foot brake
if it plays up , replace the brake booster as there is a vacuum leak upsetting the idle mixture setting
recheck by allowing it idle in neutral with the hand brake on and the apply the foot brake
Not finding what you are looking for?