Kia Rondo - Popular Questions, Answers, Tips & Manuals

There is some help in this link https://www.google.com/search?q=2004+kia+carens+driver+window+not+working ..

Question edited for clarity. Question moved to model category. https://www.google.com/search?q=2009+kia+rondo+lx+2.4+set+valve+timing+marks ..

The parts available leads me to believe there is an external canister filter and one inside the pan. https://www.google.com/search?q=2012+Kia+Rondo.+transmission+filter Video help Sorrento

Just a thought ...Look at or get measurements of someone else's and make one or have one made. You could always test drive one at a used car dealer and there's could go missing ... lol "KIDDING"

Take it first to a parts house and they will read the codes. It may be a simple fix.

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help thanks

Depending on how low your system was , If you only charged with one can , this may not have been enough. Try a second can and listen for the clicking to go away. The clicking is your compressor engaging. Safety suggestion rap the can with a small towel and shake can while Freon goes into your system. Good Luck Friend.

OK! Go to GOOGLE and search for this: 2007 Kia Rondo LX "schrader valve" and then select "IMAGES". Now from the GREEN BOXES select: "PURGE VALVE" and see LOTS of photos like this: NOW TRY THIS great site! Purge Control Solenoid Valve Anthony

Perhaps this will help https://www.youtube.com/watch?v=epE-clC0mN0

a desconected relay will not drain the battery, you might have some other issue. start the car using boost and then check if your alternator is charging around 14 volts

Maybe a loose vacuum hose under the dash, used to open/close vent doors.. I would expect that to affect the performance and gas mileage too though. Could it be the serpentine belt noise slightly muffled by the firewall, etc.?

Once you fill it, it will take a minute to get the flow back to the window. If it doesn't start to flow, check the tubing for disconnections.

It is optional but if you have one there will be a plug loose under the hood that you hook house electricity into to. It is a regular electrical cord like for an appliance.

a bit of this & that; probaly need a jack (raise engine relative to body/firewall or opposite that) and an assortment of socket extensions, swivel joint & patience. Do it w/ engine cold & use a little 'never sieze' on new plugs. It is possible, just not convenient.

REPLACEMENT 1. Remove the ignition coil connector (A). 2. Remove the ignition coil. 3. Using a spark plug socket, remove the spark plug.

With ratchet & spark plug socket

I got p2187 on my 2007 kia rondo

no inertia switch only fuses and relays

It sounds like you have checked the spark to the plugs? Fuel in the line has pressure? Pull the fuel pump relay and crank engine. Don't be surprised if it starts.