Hyundai Cars & Trucks - Popular Questions, Answers, Tips & Manuals

Tightening tourques for cylinder headTighten22±6 NmTighten42±6 NmTighten64±4 NmValve clearancesmm0,22-0,28 hotValve clearance -EXHAUSTmm0,27-0,33 hothttps://www.google.com/search?q=cylinder+head+torque+specs+for+Hyundai+i10+g4hg+engine+with+metal+gasket..

Question edited for clarity. Front Bank, middle cylinder REAR 1 - 3 - 5 ---------- 2 - 4 - 6 FRONT https://www.google.com/search?q=2009+hyundai+santa+fe+2.7+firing+order ..

Question edited for clarity. Question moved to model category. 'wouldn't crank' means it doesn't turn over, you turn the key and nothing happens, no click, no starter, the engine doesn't move. or Do you means it does crank and turn over but it doesn't fire or start? If it ran out of fuel it will have burnt out the fuel pump. The gas provides cooling and lubrication for the pump and they burn themselves out in less than 5 minutes. The people that took it will have been trying to start it when it stopped. Get a garage to check fuel pump pressure. ..

$9.46 for a new one https://hyundai.oempartsonline.com/oem-parts/hyundai-tension-pulley-adjust-bolt-9783122060 and here https://www.napaonline.com/en/p/TEM209743 https://www.google.com/search?q=2005+hyundai+xg350l+idler+pulley+bolt+size ..

Question edited and turned around for clarity. Didn't I answer this yesterday, or the day before? Everyone taking their cars apart! https://www.google.com/search?q=Hyundai+%2F+Kia+1.2+G4LA+engine.+big+end+and+mains+torque+specifications https://www.google.com/search?q=Hyundai+1.2+G4LA+engine.+big+end+and+mains+torque+specifications ..

To locate the IPS (Intelligent Power Switch) control module in your Hyundai Azera: Open the hood of the vehicle. Identify a boxy enclosure (rectangular or square) in the engine compartment. It will have electrical connectors and wiring harnesses plugged into it. The IPS control module may be attached to a support beam, the firewall, or the inner fender of the car.

My 2015 sonata had the valet deformity (that I read was famous) where I can't utilize the storage compartment button in the vehicle, on the truck and on the key. Irritating, yet not worth placing my vehicle in that frame of mind for - I just opened it physically with the key. As of late, the lock broke and nothing happens when I turned the key. Presently I can't open it both physically with the key and with any programmed choices. Is there in any case to break into the truck by means of within the vehicle? The seats go down yet the delivery is inside the storage compartment. I don't actually mind to fix it, basically not at the present time. I simply need to get all the stuff that is caught in there.

It is inside the fuel tank and part of the pump assembly unless someone has added an after market filter. https://www.google.com/search?q=2009+hyundai+santa+fe+fuel+filter+location ..

Faulty Brake Switch

P1707 Hyundai Code Meaning, Causes, Symptoms, & ...

Engine-Codes.com https://www.engine-codes.com > p1707_hyundai Faulty Brake Switch · Brake Switch harness is open or shorted · Brake Switch circuit poor electrical connection.

P1707 Hyundai Auto Trouble Code With All Car Models ' Auto ...

AutoTroubleCode https://p1707-hyundai.autotroublecode.com P1707 Hyundai OBD2 specifically refers to the camshaft (cam) timing. In this case, if the cam timing is over-retarded, the engine light will be illluminated and ...

ECU Fault P1707 and P0302

Hyundai Forums https://www.hyundai-forums.com > threads > ecu-fault-... Feb 9, 2014 - Seems he had same code as you which turned out to be bad ABS Pump. Seems to me something wrong with electronics of your gearbox. ..

For your 2010 Hyundai Santa Fe, the recommended engine oil type depends on the specific trim. Let's explore the options: Santa Fe 2.2 CRDi: Recommended oil types: ACEA C3, ACEA A3/B4, SAE 0W-30, SAE 0W-40, SAE 10W-40, SAE 10W-60, SAE 15W-40, SAE 5W-30, SAE 5W-40, SAE 5W-50, SAE 20W-50, and SAE 0W-2012. Santa Fe 2.4i CVVT: Recommended oil type: Not specified in the available data. Santa Fe 2.7i V6: Recommended oil type: Not specified in the available data. Santa Fe 3.3 V6: Recommended oil type: Not specified in the available data. Remember to check your vehicle's manual or consult a professional mechanic for precise guidance.

You will find it within the workshop manual; https://www.allcarmanuals.com/factory-service-manual-240-Hyundai-Accent-LC.html

It is hidden well. https://www.google.com/search?q=trunk+lid+relay+on+a+2013+Hyundai+Azera ..

" Known right front location "? It sounds like you changed something else, the speedometer sensor? The picture here is dreadful because it shows a turbo. The VSS is on the transmission and is involved with transmission gear changes. Possible reasons why an on-board diagnostic II (OBDII) diagnostic problem code P0501 might show up are: Problem with the VSS sensor's cables or connections. The vehicle's speed sensor not functioning. The VSS voltage requirements get inconsistent because the voltage goes up and down faster than the PCM expects.

P0501 Error Code : Here's What You Need to Know - Way

More here https://www.google.com/search?q=2010+Hyundai+Accent+P0501+Speed+sensor+location ..

Don't forget to check the cabin filter is clean. Blocked filter means no cold air flow.

Question edited for clarity, too many words :>D Question moved to model category. They are all in this link https://www.hyundai-forums.com/threads/hyundai-getz-1-3-2005-g4ea-big-end-torque-settings.639857/

Hyundai Getz 2003 1 1 1 3 PDF

Scribd https://www.scribd.com > document > 138325436-HYU... Tightening torque Main bearing cap bolt 1.3: 55 ~ 60 Nm (550 ~ 600 kg.om, 41 ... big end bear- ing. Crankshaft end play 1.3L: 0.05 ~ 0.175 mm (0.002 ~ 0.005 ... ..

There is a pinch point along the sill. One near the front door hinge and the other at the other end of the sill.

A good, reasonably priced 1/2" impact wrench for tire rotation on a 2010 Hyundai Santa Fe is the Milwaukee M18 FUEL or the DEWALT DCF899P1 imo. Both offer great power and durability for automotive tasks.

0.17 to 0.23mm inlet 0.25 to 0.31mm exhaust on a cold engine

Help in the link. Go in through the back seat. Are you sure you don't have a trunk release inside the car, most do? https://www.google.com/search?q=locked+my+keys+in+the+trunk+of+my+2015+Hyundai+Sonata ..

Question edited for clarity and good order. Question moved to moved to model category. They tend to hide them under the engine and you access from behind the wheel.

2007 Hyundai Santa Fe Starter

AutoZone.com https://www.autozone.com > hyundai > santa-fe > 2007 PRICE: 215.99 · Mounting Shims Included: No · Tooth Quantity: 9 · Voltage: 12.0 · Family: PMGR (Permanent Magnet Gear Reduction) · Starter Rotation: Clockwise ...

Hyundai Santa Fe Starter Replacement Cost Estimate

RepairPal.com https://repairpal.com > Estimator > Hyundai > Santa Fe The average cost for a Hyundai Santa Fe Starter Replacement is between $408 and $515. ... Labor costs are estimated between $77 and $97 while parts are priced ...

Get the Best Priced Hyundai Santa Fe Starter

Parts Geek https://www.partsgeek.com > ... > Santa Fe Parts Replacing a 2009 vehicle starter costs $412 to $514. Repairs at the 2006 Hyundai Santa Fe starter location run from $209 to $276, so model year does have ... ..