Hyundai Santa Fe - Recent Questions, Troubleshooting & Support - Page 5

You could try pulling the fuse for the alarm system. Not sure if thats going to work tho

nothing if you do it yourself.....remove power steering pump top......turn steering wheel all the way right slowly...then turn the steering wheel all the way left.... repeat about 5 - 6 times and top off power steering fluid...repeat if necessary..

Hi First off what engine and drive line and exactly what are you looking to do or repair ? need more info

enable blue tooth on phone and wait while it searches...the infotainment center will show you a code on the screen...type in the code the car gives you into your phone..wait for the code... then pairing will be successful..

replace entire coil pack assembly...right center and left banks..

crankshaft position sensor.

all spark plug wires replace...replace crankshaft position sensor afterwards.

crankshaft position sensor.

replace starter..

crankshaft position sensor...

crankshaft sensor.

begin with a brand new battery...

Autozone...purchase a repair manual.

purge valve or spark plug wires....replace purge valve first..

crankshaft position sensor faulty...works until it gets hot then shuts down entire engine until it cools. replace the sensor.

driver side...below the coil packs..on the side of the block..have to remove cooling fan and its directly behind the fan..need a flashlight to see...follow the wires to the block.

change your spark plugs..all of them...and and put in the correct amount of oil..

crankshaft position sensor first...and/or purge valve.

change transmission filter and fluid.

turn the steering wheel slightly to the right while turning the key.