Ford Cars & Trucks - Page 9 - Popular Questions, Answers, Tips & Manuals
What the torque sequence and spec for a 1998 Ford Ranger 2.5 L gasoline head bolts? not 2.5 diesel
The torque sequence and specifications for the cylinder head bolts on a 1998 Ford Ranger 2.5L gasoline engine are as follows:
- Tighten all bolts in the sequence shown below to 22 ft-lbs (30 Nm).8 4 1 5 \ ' / ' / 7 3 2 6
- Tighten all bolts in the same sequence to 45 ft-lbs (61 Nm).
- Tighten all bolts in the same sequence an additional 90 degrees (1/4 turn).
- Tighten all bolts in the same sequence an additional 90 degrees (1/4 turn) again.
Ensure that you follow the sequence and torque values precisely to prevent uneven tightening and potential head gasket issues. It's also crucial to use a good quality torque wrench for accuracy. Please note that torque specifications may vary slightly depending on the specific engine build, so it's always a good idea to consult your vehicle's service manual for the most accurate information for your particular engine.
How do I get a hold of ford mechanic alex
Alex is not a modern day Expert on Fixya. Out current Experts areJeff Armer full time electrics tech https://www.fixya.com/users/jeff-armerSteve Pack https://www.fixya.com/users/steve-pack-525KarDoc https://www.fixya.com/users/kardocI deleted the answer that was previously given, because it was AI Chat GPT4 produced by a character who thinks he will get paid for answering questions.You need an auto electrician. The wipers are controlled via the Body Control Module and your issue can be diagnosed in about 20 minutes with a pro grade scan tool computer.
https://www.google.com/search?q=auto+electrician+near+me..
1994 ford taurus not shifting
check your transmission fluid level while vehicle is "off " it should be higher than normal . Now Check the fluid a 2nd time with the vehicle running if the fluid has not moved fromits original mark like from the first you checked it your torque converter may have worned down splines but your fluid level can lead you in the right direction.
Porque no prende el tablero de mi ford espedition
Depends on what year your ford is. If there is no information displayed then it could be a bad connector or a bad bcm (body control module). Connection a scanner would help tell you where to look.
Not finding what you are looking for?