Dodge Cars & Trucks - Page 5 - Recent Questions, Troubleshooting & Support
Turn signals wont work but flashers do
Hi.
On your 98 Dakota.
Is equipaded with a single Flasher.
If you replace all ready.
Check the FUSE # 10, 15 amp..
On the Fuse box. left side of Dash.
and the FUSE D 25, amp. On engine compartment Fuse box.
Check the proper funtion of the HAZARD switch.
Bacause if the Hazard switch is bad the turn signal don't will work. Match the OLD flasher with the New one.
If after of this still not work.
Remove the steering wheel cover, locate the Turn signal switch connector and with a TEST Light check power with the Key ON
12v. to the RED wire and PINK wire..
If you found 12v. check the connection with the switch.
If the connection is good. you will need to replace the turn signal switch.
But if you don't found 12v. You need to look a an open circuit.
And fix it..
I hope this help on your problem..
Thank you for use fixya...
Sunshine Trail
Sunshine Trail hybrid caravans are built tough to withstand the harshest climate Australia can throw at them. Utilizing state of the art composite materials and high quality fittings they are built tough with comfort in mind. These cleverly designed hybrid caravans offer the very best value on the Australian market.
Brakes seizing up
You may have contaminated brake fluid. The fluid gets too hot, caused the fluid to expand and lock up your brakes. once it cools it will allow you to move. Flush the brake system, start at the wheel farthest from the master cylinder and bleed the system until all the old dirty fluid is out. Just allow it to gravity bleed, don't waste your time doing the pump and release method. It only gives your buddy a sore foot and if you miscue you **** air back into the line.
Let me know if I can help you with any more info or guidance.
2006 Dodge Ram 1500 5.7 Hemi. What's wrong with my truck?
Dodge Ram 1500/2500 (2002-2009) fuses
Fuse Box Diagrams
https://fuse-box.info > dodge > dodge-ram-1500-2500...
Fuse box diagram (location and assignment of electrical fuses) for Dodge Ram / Ram Pickup 1500/2500 (2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009).
Not good fuses to blow. you need to find out why?
31
31
10 or 15 amp
except SRT (2006) (15A): Shift Motor and Mode Sensor Assembly (ETC), Powertrain Control Module (Gasoline);
2007-2008 (10A): Powertrain Control Module;
2008-2009 (15A): Powertrain Control Module
4
40
20amp
Base: Power Outlet - Instrument Panel, Power Outlet - Lower Console (2007-2009)
Here are your dash warning lights. The lightning bolt is Electronic Throttle Control, and you can't drive without that. Not sure that your sail and sun is unless it is the
Cold Ambient Derate Mode Indicator
You need a local auto electrician. you can't guess stuff like this, it needs a pro grade scan tool computer.
https://www.google.com/search?q=auto+electrician+near+me
..
How do I fix my 92 dodge dakota with 3.9 v6
Check all electrical connections for tightness and corrosion. Inspect the ignition module and crankshaft position sensor for faults. Verify the condition of fuses and relays related to the ignition system. Consider a potential issue with the ECM/PCM.
Can't find location for trailer elect hook-up
there is no factory connector you must tap into the existing wiring for brake, turn signals, tail and running lights, they make special adapters to "piggy back" into these wiries, U-Haul trailer rental can do (install and sell) this kit for u very cheap.
Not finding what you are looking for?