Dodge Dakota - Popular Questions, Answers, Tips & Manuals

This might not be engine related. More information please. Does this happen only when you turn the steering or all the time? Is it just when reversing or both directions? Test this by reversing slowly in a straight line for about about one truck's length then gently start turning the steering wheel. Listen and feel for what happens as you turn the steering. Transmissions can also affect how an engine behaves when their put into gear. Do you know if it has been serviced in the past? Have you had it scanned for OBD Trouble Codes? All cars after 1996 have to have this system fitted. Scanning for codes will tell you if it is a sensor causing the issue. If you have to pay for the service ask at 4 or 5 different places as prices can be VERY different. Comment below with the codes and I'll try to help you more.

Question edited for clarity. Question moved to model category. It could be a few things, none of them good and all dangerous. Have it checked out by a mechanic. A few of the reasons in the link, disc brakes and suspension are the most likely. https://www.google.com/search?q=2004+Dodge+Dakota.+I+hit+the+brake+pedal+and+the+whole+truck+vibrated+in+the+front+end ..

Question edited for clarity. Question moved to model category.

3.9L EGR valve location

Dakota Durango Forum https://www.dakota-durango.com > threads > 3-9l-egr-... OBD-II trucks (96 and up) didn't have EGR any longer. If it did it would have a tube coming off the passenger side exhaust manafold and running to the EGR valve ...

2000 dodge dakota egr valve location

Fixya https://www.fixya.com > ... > Cars & Trucks > Dodge 4 hours ago - On a 2005 Dakota with 4.7 liter engine (non-HO), the EGR valve is located near the intake manifold on the driver's side right up against the ... SOLVED: Where is egr valve on 2000 dodge durango - Fixya Oct 26, 2008 Where is the EGR valve located on a dodge durango - Fixya Feb 5, 2009 How to reach the EGR valve on a 2000 dodge durango - Fixya Oct 15, 2015 Where is the location of the egr valve on the 4.7 liter engine Nov 17, 2019 More results from www.fixya.com

Question edited for clarity and spelling 'solenoid'. Question moved to model category. It may not be the solenoid, it is a speed sensor error related to 4th gear. The P0734 code stands for "Gear 4 Incorrect Ratio." It's logged when the PCM detects that the RPM of your input speed sensor doesn't match the expected RPM in 4th gear. Aug 17, 2023

P0734 Code: Gear 4 Incorrect Ratio - CarParts.com

More here https://www.google.com/search?q=Dodge+Dakota+P0734 ..

Question edited for clarity. Question moved to model category. All functions of the BCM. You have a computer network error and / or a bad set of connectors. A good auto electrician can diagnose using a professional grade scan tool computer. You can't guess problems like this. https://www.google.com/search?q=auto+electrician+near+me ..

The problem was the motor. Replace the blower motor and resister and it should be fine. If the blower motor resistor is experiencing repeated failure, the blower motor is likely drawing too much current. Excess current draw from the blower motor will cause the resistor to burn out. The blower motor in your truck has a resistor block with multiple resistor wires. Jun 21, 2023

Why Does the Blower Motor Resistor in My Dodge Dakota ...

More here https://www.google.com/search?q=2004+Dodge+Dakota.+It+keeps+blowing+the+blower+fan+resistor ..

Question edited for clarity and fix the text and add some spaces. Question moved to model category. This is usually cause by air locks. When you have air in the system, the heater core doesn't fill with coolant and doesn't circulate. If you add coolant and you are on a driveway with the front of the vehicle down a few degrees, the heater core doesn't fill. https://www.fixya.com/cars/r29872074-vehicle_cooling_system_no_heat Another outside possibility is that the impeller on the water pump is worn out. Other ideas here and videos https://www.google.com/search?q=1999+Dodge+Dakota+no+heat ..

Amazon and eBay https://www.google.com/search?q=999+Dodge+Dakota+SLT.+Quarter+glass+replacement

Question edited for clarity. Question moved to model category. check out the link https://www.google.com/search?q=Dodge+Dakota+4.7+V8.+vacuum+line+diagram ..

The time is shown on the radio display. https://www.google.com/search?q=2001+Dodge+Dakota+clock+location ..

Question edited for clarity. Question moved to model category. First diagram in this link as shown on JustAnswer, but you don't even need to go there, just click on the diagram. https://www.google.com/search?q=2002+dodge+dakota+sport+3.9+v6+firing+order ..

In this link https://www.google.com/search?q=1996+Dodge+Dakota+with+3.9+L+engine.+Vacuum+lines+diagram ..

It should never be bone dry. The coolant should be topped up to be between the marks. Did you read the Owner Manual? https://www.manualslib.com/manual/40540/Dodge-2005-Dakota.html?page=315#manual ..

Question edited for clarity. Question moved to model category. Sensor issues or wiring to them.

Code P1391 Dodge CMP or CKP Signal Intermittent ...

AutoCodes https://www.autocodes.com > p1391_dodge Engine Light ON (or Service Engine Soon Warning Light) · Lack/Loss of Power · The engine may be harder to start · The engine may stumble or stall.

Cam Sensor Failure Causing no Start or Stalling : Dodge ...

RepairPal.com https://repairpal.com > Problems > Dodge > Dakota On 3.7L V6 and 4.7L V8 engines the camshaft position sensor may fail causing the engine to crank but not start or it can cause intermittent stalling.

Dodge Dakota Vehicles With This Problem

RepairPal.com https://repairpal.com > Problems > Dodge > Dakota On the 3.9L V6 and 5.2L V8, an intermittent connection in the crank position sensor wire connector can cause poor engine performance or the engine may crank but ... ..

Question edited for clarity. Question moved to model category. You are tackling this in a very convoluted route. The dealership can make you a key based on the VIN Number, and an Auto Locksmith can make you a key using an impressioning tool. all vehicles came with 3 keys so you are never left with just one. Get two made. If the vehicle has anti-theft security and immobilizer, those need programming to the new keys. In fact it does, this is not just an easy swap out https://www.google.com/search?q=auto+locksmith+near+me

How do i reset the 2002 Dodge Dakota security?

Vehicle History https://www.vehiclehistory.com > questions > how-do-... Jun 19, 2023 - To reset the alarm on the 2002 dodge dakota you need to lock all the doors, then unlock the driver side and put the key into the on position. 3 answers · Top answer: I understand You want to reset the immobilizer on Your 2002 Dodge Dak

ck here... https://www.fiero.nl/forum/Archives/Archive-000003/HTML/20110502-6-065656.html

I'll need more information please. First go back to basics for this. Re-check Everything you touched, moved or removed to replace these parts This could be somethng as simple as a wire you've forgotten to reconnect. Yes, I've made that mistake. What EXACTLY do you mean by "Won't start". Are you getting absolutely nothing at the key? Dash lights but nothing else? Dash lights and it's turning over very lazy? Normal turning but not even trying to start? Trying to start but stalling? These answers will give clues as to where the problem is likely to be.

Flat battery and out of gas? It could be so many things. You need an auto electrician. The pro grade scan tool computer will diagnose in 15 minutes. https://www.google.com/search?q=mobile+auto+electrician+near+me

Just drive it carefully. The front driveshafts provide rigidity. I would be worried the wheels would buckle in or out. You should watch the YouTube Channel 'Just Rolled In'. Your type of fix features in some of the videos. :>) https://www.google.com/search?q=2004+Dodge+DakotaFront+drive+line+CV+joint ..

The Engine Control Module is a computer not a sensor. https://www.google.com/search?q=1991+Dodge+Dakota+ECM+sensor+location ..