ATVs - Page 9 - Recent Questions, Troubleshooting & Support

if this has been sitting,,even if it hasn't, #1clean or replace the air filter, #2have the carb professionally cleaned and set, and #3 replace the spark plug.

ATVs | Answered on Aug 21, 2019

I got this free Pdf manual from reliable-store. com for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years

ATVs | Answered on Aug 21, 2019

NO fire on a polaris check the left handlebar switch.

Always check compression.

Disconnect Black from the CDI (all cutoffs off)

Polaris ATV | Answered on Aug 20, 2019

Contact Polaris directly to inquire.

ATVs | Answered on Aug 19, 2019

Check your start button for sticking if it is still running. If not, pull the starter and try it while out of the rhino and see if it works correctly. Make sure your bolts are torqued correctly.

Yamaha 2006... | Answered on Aug 12, 2019

Sounds like your float is stuck. Pull that carb off and clean it. Berryman's carb cleaner is one that works well. Clean the float needle and check the surface. Use aluminium cleaner/polish like mothers on a cotton swab and clean the float needle seat. It will shine up like new. Check your float height before reassembly. I do these all the time and don't need to but parts.

John Deere 2008... | Answered on Aug 12, 2019

If you are talking about the crankcase vent hose... a very small amount of oil vapor could be considered normal. If it is flat out oil. Check your oil level and see if it is too high. Otherwise it sounds like blow by.

kawasaki 2005... | Answered on Aug 12, 2019

Did you check the choke sometimes it
Gets stuck. Be cause if it's on it won't do anything it will die everytime you apply gas. Or the gas change over value on the side of gas tank I hit mine by mistake one time and it wouldn't
Go or do anything.

ATVs | Answered on Aug 12, 2019

No it's a safety feature.

ATVs | Answered on Aug 12, 2019

If engines laying down mite need a new carb. If not then you need to
Replace clutches ... Good luck.

ATVs | Answered on Aug 08, 2019

Try google image make model year they have wiring schematics for everything. Good luck

kawasaki 2004... | Answered on Aug 08, 2019

spray penetrating fluid let sit and use a dead blow hammer to hit around rim

ATVs | Answered on Jul 24, 2019

Google it on Google Image make model and type.

ATVs | Answered on Jul 24, 2019

Not finding what you are looking for?
ATVs Logo

9,045 questions posted

Ask a Question

Usually answered in minutes!

Top ATVs Experts

john h

Level 3 Expert

22486 Answers


Level 3 Expert

85222 Answers

 Scott Tx
Scott Tx

Level 2 Expert

604 Answers

Are you an ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides