SOURCE: QUAD QUESTION! 1998 yamaha warrior 350 bogging down
is the ignition safety switch sticking on the parking brake?
SOURCE: How do I adjust the valves on my 2003 Yamaha Warrior YFM 350X?
first you need to remove everything that covers your valve covers(gas tank etc.) remove the intake valve cover,and the rotor nut and timing plug.set the engine a t.d.c.(top dead center)fit a socket onto the rotor nut and turn it counterclockwise until the"I" mark appears align it with the index mark in the timing hole.use a flat feeler gauge between the top of the valve and the adjuster.loosen the locknut and turn the adjuster just until you feel resistance on the feeler guage.hold the adjuster and tighten the lock nut down.i can not tell you the min.clearance spec to your quad since i have a 660 raptor.try using the smallest clearance number.
SOURCE: my yamaha warrior 350 has gas and spark but wont start.
there on the flywheel 2 little arrows
SOURCE: 98 YAMAHA WARRIOR 350 WONT START
have your carb. rebuilt and make sure there is not anything in the intake tube between the carb and the engine.
SOURCE: QUAD QUESTION! 1998 yamaha warrior 350 bogging down
I had a problem somewhat the same.
Make sure the air-intake boot has no holes in it.
468 views
Usually answered in minutes!
×