Well liquid wrench or WD 40 mite help
Removing the bolts or a tire shop.
This may sound excessive for some however has worked many times for same situation on a few dif machines. If spraying with penetrating fluid fails and or any other attempt. Put machine up on blocks or what have you (i flipped the one i was working on, on its side because i had no blocks or stands or anything). Secure it so the machine itself wont budge, find a railroad tie, or a 4x4, or 3x3 piece of wood that is solid with no rot or weakspots... swing the 4x4 like its a baseball bat with every ounce of "i wont let these rims win" you got, aiming for the inside lip of the rim itself every few hits spin the rim a tad...eventually its gnna come off. I mustve taken 100 swings, and im no sissy ...before it came off, and i was swinging upward, more like swinging a golf club..sucked but worked..best of luck.
Cheers
Spray penetrating fluid let sit and use a dead blow hammer to hit around rim
SOURCE: front hub removing
remove the wheel then undo the big nut in the center then remove the brake caliper then remove the big nut and the hub will come off !
923 views
Usually answered in minutes!
I just started 6 weeks ago and I've gotten 2 check for a total of $2,200...this is the best decision I made in a long time! "Thank you for giving me this extraordinary opportunity to make extra money from home. This extra cash has changed my life in so many ways, thank you!"
Visit site:http://Aprocoin.com
×