ATVs Logo

Related Topics:

Cliff Kay Posted on Jun 05, 2019

On a 4010 Kawasaki mule back cylinder not firing but getting a spark the motor will run but only running on one cylinder

1 Answer

Ian Fowlie

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Welcome Back:

Visited the website for 2 consecutive days.

  • Contributor 10 Answers
  • Posted on Jun 05, 2019
Ian Fowlie
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Welcome Back:

Visited the website for 2 consecutive days.

Joined: Jun 02, 2019
Answers
10
Questions
1
Helped
5941
Points
20

Sounds like its not getting fuel to the back cylinder ,check that the valve gear is working properly in the back cylinder

4 Related Answers

john h

  • 29494 Answers
  • Posted on Nov 13, 2016

SOURCE: I have a Kawasaki Mule 4010 2012 ,steering turns the wheels do not turns?

damage to shaft or steering gear

Testimonial: "Great thanks"

Ad
5keepers541

Steve P

  • 3912 Answers
  • Posted on Aug 23, 2017

SOURCE: i have a 2006 kawasaki mule trans 4x4 it gets gas spark plugs are firing but will not run

Hey Mike,
An internal combustion engine only needs three things to run...(assuming the internals are all good)..

1. A properly timed spark
2. Correct air/fuel mixture
3. Compression

which of these are you missing??

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Dec 27, 2017

SOURCE: what will cause an ecu to go out on a 2009 kawasaki mule 4010

Electronic component failure inside the PCM module..

Testimonial: "there is no pcm module on my 2009 mule4010"

nolanchupp14

nolan chupp

  • 38 Answers
  • Posted on Mar 26, 2018

SOURCE: The horn on my Kawasaki 4010 mule does not work can't find help in manual

check the connection if thats good then it could be that you need a knew horn module

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Kawasaki 4010 Mule 4x4 diesel blows a fuse every time I use the brakes. What do I look for?

Something is shorting to earth on the brake lights.

Get a pack of fuses.

Remove left side bulb. Brake, does is blow the fuse?
Remove right side bulb. Brake, does it blow the fuse?
If yes to the above, it is the light fitting or wiring rubbed through to that light.

If no, it is the switch or wiring to the switch on the brake pedal.

https://www.google.com/search?q=4010+4x4+diesel+mule+blows+fuse

..
0helpful
1answer

What are the torque settings for kawasaki mule 4010 head gasket

Helping a friend work on a Mule 2510, twin cylinder gas engine. Not sure of the year, somewhere around 1995-96? Can anyone help with cylinder head torque specs? We ordered a service manual but it hasn't come in yet.
https://dolgeneraldgme.com/
Aug 20, 2019 • ATVs
0helpful
1answer

Why won't my Kawasaki 4010 fuel injection start

Coil pick up runs the fuel pump also so u need to check the primary and secondary coil
0helpful
1answer

There is no fire to the spark plugs but will turn over what to check

First replace the spark plug with a new one. Then check the wires from the positive terminal on the battery to the coil and then to plugs. Put a 12 volt tester on the positive wires and the battery ground or any metal on the engine to see if circuit is hot. Hope this helps. Make sure you test the plug wire as well.
0helpful
1answer

What makes the DFI light come on but the engine still runs but seems to run slow

More than likely you have either a bad coil or the rocker arm has slipped off. Pull each plug, Check plug. If 1 is fouled, that cylinder is where the problem is. Check for spark on each cylinder, If one has no spark, replace the coil (there are 2). Replace only the bad one. Before replacing the coil, check for compression, if on is real low, pull off the rocker cover and check for valve action.
0helpful
1answer

2012 kawasaki mule 4010 hitting on front cylinder only

First is the engine Diesel or Gas?
if it is a diesel engine it has almost got to be a compression or fuel problem if it is a Gas engine it can be a valve adjustment, fuel, compression, or spark problem
Not finding what you are looking for?

2,987 views

Ask a Question

Usually answered in minutes!

Top ATVs Experts

john h

Level 3 Expert

29494 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...