Are the plugs wet with gas after you prime the engine and try turning it over a few times? You may not be getting gas to the cylinders if you left gas in the fuel system when you put it away and it has evaporated and left behind gunk that causes the carburetor to stick or the injectors to clog. (I always use Sta-bil or a similar gas storage treatment when putting up a wet engine). Get two bottles of carburetor/injector cleaner. Put one in the gas tank to mix with the gas there. If you have access to the carburetor, pour part of the bottle of cleaner into the carburetor and work the throttle and choke back and forth a few times with the cleaner in place. Gently try moving the choke plate or float to see if they are sticking. Replace the carburetor housing and try cranking the engine several times. Otherwise, you probably need to have a mechanic look at it.
SOURCE: show how to time a artic cat 2006 250 artic cat
The timing is set electronically..(if the engine is assembled correctly)
SOURCE: I cant move the chain adjuster on a artic cat 300 dvx 2009
Maybe this info can help service info for Arctic Cat 300 Utility Service Manual: Drive Chain
https://www.manualslib.com/manual/855261/Arctic-Cat-300-Utility.html?page=15
97 views
Usually answered in minutes!
×