Question about ATVs

1 Answer

I have a 1998 mule 550 kaf300c and it has no fire I've put a new plug coil new battery but still no fire can you help me

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • ATVs Expert
  • 604 Answers

Test your stator

Posted on May 27, 2018

Ad

6 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
c17hydro

Greg Bernett

  • 2989 Answers

SOURCE: firing order of 1998 mercury mystique

Here's the firing order:


c62086b.gif

Posted on Mar 22, 2009

Anonymous

  • 1 Answer

SOURCE: car is only firing on two cylinders i put a new igination coil

have a mechanic check the timing on the car if its off you should know it will make a definite click ticking sound that increases with the rpm and also check the position of the coil on the camshaft!

Posted on Apr 12, 2009

BCAS1298

Alexander Mimun

  • 3092 Answers

SOURCE: firing order 1998 corolla 1.8

Looking at coilpack with harness plug on right, front to back # 3 then # 1, below # 2 then # 4.

Posted on Jan 02, 2010

Anonymous

  • 1 Answer

SOURCE: astra 1998 1.6 16v ecu lite on,flashes when

can of wynns injector cleaner appears to have (de)solved the misfire

Posted on Jan 29, 2010

mclaen

  • 486 Answers

SOURCE: 1998 buick lesabre, 3.8 six cylinder, #1 coil not

If the other two coils are working fine yet the other coil won't work at all [no spark out of either tower] then odds are that the ignition module that the coils are mounted on is bad. Often the module will be damaged when a coil or plug wire goes bad and the extremely high spark voltage finds an alternative path back home which is often through the body of the module This high voltage can damage the electronic components inside the module enough that it may no longer be able to drive the coil. Never hurts to double check your plug wires by substituting a couple of known good ones or swap one of the other coils around with this one but if you still don't have any spark after doing all that then it's most likely the module that's bad. Hope this helps a bit and good luck!

Posted on Jul 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 3010 mule is not firing on the front cylinder


plug,valve, ( injector if efi) coil are items to check

Jul 01, 2017 | ATVs

1 Answer

Mule 550, It starts fine, but will not shut off when the key is turned off....any suggestions?


Hey Matt, sounds like the switch is going bad.. I would see if it will start - WITH THE KEY OFF by "jumping" the solenoid.. if the switch is bad.. it might start... and confirm the switch is bad..

Jun 21, 2017 | kawasaki 2008 Mule 3010 4x4

1 Answer

There is no fire to the spark plugs but will turn over what to check


First replace the spark plug with a new one. Then check the wires from the positive terminal on the battery to the coil and then to plugs. Put a 12 volt tester on the positive wires and the battery ground or any metal on the engine to see if circuit is hot. Hope this helps. Make sure you test the plug wire as well.

Sep 21, 2015 | kawasaki 2009 Mule 4010 Trans4x4

1 Answer

Won't crank or fire up the spark plug.


might need a new coil lead.maybe a loose wire at the magneto.check all wires including ground wire.make sure ground wire has good contact with bare metal on the frame

May 25, 2015 | Can-Am Care 2007 DS 90 4-Stroke

1 Answer

Replace drive belt 550 mule kawasaki


You will need a special tool from Kawasaki for the clutch tool removal to remove the belt and to install the new belt. Stop by your local dealer for the tool and they can explain the pretty simple way to remove the side panel and use of the tool. the tool runs about 76.00 Hope this helps you out some.

Sep 01, 2014 | ATVs

Not finding what you are looking for?
ATVs Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top ATVs Experts

john h

Level 3 Expert

22486 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

 Scott Tx
Scott Tx

Level 2 Expert

604 Answers

Are you an ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...