At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi.
this is all i can find on the internet about it. Where to find serial number on Polaris Ranger?
Whenever corresponding about a Polaris RANGER utility vehicle, be sure to refer to the vehicle identification number (VIN) and the engine model number and serial number. The VIN can be found stamped on the lower frame rail on the front LH side of the vehicle (see Figure 1-1).
Check the main fuse to the ignition switch.It will either come directly from the battery + terminal or pick up from the "hot" meaning "positive" side of the starter motor relay. If it comes from the relay you will locate it by following the main "positive" lead from the battery. From the relay you can then trace it to the main fuses. Hope this helps you out.
Run some Sea Foam in the gas it will clean the carb sounds like a sticky jet or dirty carb the Sea Foam will clean the carb of any residue or deposits that have built up in the carb over time causing it to malfunction you can get the Sea Foam at most parts stores and its cheap stuff and works awesome.
×