- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
KymcoForum.comhttps://www.kymcoforum.com > ...
Jan 10, 2015 - Try un-plugging the rectifier, and see if you get spark. It may be shorting the stator to ground. Also try clipping the black, and yellow ...
Same problem with my mxu 500. Charged battery. Nope. Checked all connections in starting system. Nope. Swapped out solenoid relay. Fixed mine. Was cheap online- less than $20. Mine would start with jumper cables or batt charger on 80amp boost. Good luck!
Hi Shannon:
Possibles:
- Needle valve has been compromised, possibly held open with grit.
Carefully dismantle and blow out all orifices with compressed air.
- Float level set too high. Review the way the float shutoff mechanism works. Make sure the float moves up and down easily and that it still floats as intended. Double check the lever that moves the needle valve. Make sure it is correctly connected to the needle.
Reply as a COMMENT to this post to let me know what you find.
Cheers.
×