Yamaha 2007 Grizzly 350 Auto 4x4 Logo
D
Dennie Robinson Posted on Dec 23, 2013

ATV Yamaha Grizzly 350 2007 will not start

Will not start except when primed, will not stay running

1 Answer

Greg Haggart

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 14 Answers
  • Posted on Dec 26, 2013
Greg Haggart
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Nov 23, 2008
Answers
14
Questions
1
Helped
10864
Points
24

Sounds like it has sat for a while and your jets are gummed in the carb there is a you tube video on this topic that will walk you through the repair other thing to check turn fuel tank valve to off position remove fuel hose at carb slowly turn valve on to see if you have fuel to the carb if there is fuel there turn valve off install hose back on carb remove remove hose at tank valve now on the bottom of the carb you will see a plug or screw loosen this ( there may be fuel running out of drain hose have a bucket to catch fuel) now on the hose at tank valve blow threw it ( do not use air compressor) air should blow freely if it dose not your needle valve is stuck and there is no fuel getting to the carb or stuck float or a hole in the float and full of fuel

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

I have a 2012 Yamaha grizzly 300 2wd and it won’t hold a charge in the battery and it seems like it ain’t getting much gas to keep it running need help before I sell

Put a new battery in it and add it to the price. ATV batteries are abused, they need a trickle charge if not used for a month. Expected life in a neglected state would be 3 to 4 years. Is it the original battery and 8 years old? Strip and clean the carburetor.

https://www.batteriesplus.com/battery/atv/yamaha/grizzly-300-automatic/300cc/2012

https://www.google.com/search?q=2012+yamaha+grizzly+300+clean+carburetor

..
Apr 21, 2021 • ATVs
0helpful
1answer

Yamaha grizzly 350 avt only makes a clicking sound not starting any help

Connect Jumper Cables to Ground (A Clean Metal Surface) and to Output Side Of Solenoid - Hook Other End Of Jumper Cables to Car Battery Momentarily to By-Pass Starter Circuit - If it Starts you Have a Bad Solenoid Or A Weak Battery On ATV. Contact me for additional help! "https://www.6ya.com/philip_b05beb373d913f26"
0helpful
1answer

I have removed 12 bolts on a 2007 Yamaha grizzly 450 Starter Clutch housing but still can't get the cover off. HELP and thank you.

Hey Leo.. STOP!!!! get one of these manuals... it will be invaluable to you!! Professionals USE them...(I own a BUNCH of these!!)..
I am having trouble finding the 2007/450cc grizzly?
Here is the links to Clymer and Haynes.. get one of their repair manuals!!
Yamaha atv manuals

Yamaha ATV repair manuals
Sep 14, 2017 • ATVs
0helpful
1answer

2005 Grizzly display not working only back light comes on. ATV running great. Checked fuses with meter and checked voltage at fuses O.K.

Yamaha atv manuals
Yamaha ATV repair manuals

Hey Bruce,
get one of these manuals..they have the wiring diagrams and some troubleshooting tips.. trace the wires using the wiring diagram...take your time.. you CAN figure it out!!!
Sep 13, 2017 • ATVs
0helpful
1answer

How to install a pull start on my atv

[PDF]GRIZZLY 450 YFM45FGX OWNER'S MANUAL - Yamaha

www.yamaha-motor.com/.../lit-11626-21-46_griz... Yamaha Motor CompanyThis ATV should not be ridden by anyone under 16 years of age. ... Product and specifications are subject to change without notice. ...... Recoil starter. 4. Throttle ...
0helpful
1answer

Engine dies as soon as I put in reverse and will not start in reverse.

Grizzly 125 stalls in reverse - Yamaha Grizzly ATV Forum

www.grizzlycentral.com > ... > Grizzly Engine & Transmission
Oct 18, 2013 - 13 posts My dad just bought a 125 and it stalls the instant u pit it in reverse. ... electrical sensor that will kill the engine if the brake isnt depressed when u go into reverse. so now i need to ..... yamaha grizzly 125 dies when put in reverse.
Sep 29, 2015 • ATVs
0helpful
2answers

Why would my 660 grizzly pop in & out of forward gear, jus whines, jumpin in & Out ???

Grizzly 660 Shifting problem. - Yamaha Grizzly ATV Forum

www.grizzlycentral.com > ... > Grizzly Engine & TransmissionMar 12, 2012 - 4 posts This is a discussion on Grizzly 660 Shifting problem. within the Grizzly Engine ....2005 grizzly 660 gear position sensor problem.
0helpful
1answer

Backfires when you try to rev up engine,

check fuel flow and check spark at spark plugs

According to an "ATV Rider" 2009 article, "When the Grizzly was introduced in 1998 as a 600cc machine, the top was blown right off the displacement wars of the time."
It was replaced in 2002 with Yamaha Grizzly 660, an even bigger engine derived from the well-established all-terrain vehicle (ATV) Yamaha Raptor 660R.
Grizzly's 660 cubic centimeter (cc), four-stroke, liquid-cooled single overhead camshaft, five-valve engine performs well in open country, but sometimes it causes serious problems for owners.
Before you call a Grizzly dealer, however, trying a few tricks in your garage can save you a lot of time and money.

Check the fuel level.
Locate the fuel meter indicator on top of the multifunction display.
If it does not work properly, open the fuel tank, and push the Yamaha 660 Grizzly side to side.
Ensure the fuel is not contaminated by water or rust.
If you have not driven your Grizzly 660 for a long time, drain the tank completely, and fill it with a fuel tank cleaner.

Check fuel hoses for cracks or leakage.
The hoses should be soft and simple to bend.
Replace those that show any sign of wear.

Check the compression.
Screw a compression tester into the spark plug hole, and press the electric starter button.
If no compression exists, contact a Yamaha dealer.
Wipe wet or dirty electrodes with a dry cloth.
The spark plug gap should be checked regularly

Correct the spark plug gap.
Measure the gap with a wire thickness gauge.
If necessary, adjust it to 0.8mm using a screwdriver or replace the spark plug.
Use only a Yamaha-specified spark plug.

Check the Yamaha 660 Grizzly's battery.
Operate its electric starter.
If the Grizzly starts quickly, then its battery is in good condition.
If the engine turns slowly, check the battery lead connections, and you may need to change the battery.
If the engine still does not eventually start, your Grizzly is beyond home repair.


0helpful
2answers

ATV

It normally means check engine like a check engine light.
0helpful
1answer

2003 yamaha grizzly 660 4x4 atv, right side rear axle/cv joint came lose at differential

Yamaha Grizzly 660 2002 2008

get one of these..If you are going to try the repair yourself....
.this is serious, ....
there MIGHT be damaged components that need to be inspected by a professional.
Not finding what you are looking for?

767 views

Ask a Question

Usually answered in minutes!

Top Yamaha ATVs Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

john h

Level 3 Expert

29494 Answers

Are you a Yamaha ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...