At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check key switch for voltage coming in and out of it with a test light .if you have voltage in and out. go to fuse block check it should have 4 fuses check contacts . disconnect battery clean them with small flat driver .commen problem .with all fuses out. key on, test contact for power atleast 3 should have power one should have power when starter button is applied make sure all contacts are making contact to posts on fuses.
Put enough grease to cover the rollers. Also add some to the actual tracks where the rollers glide on. The clutch should have a thin cover that is held on by three small screws. that is your "grease cap" If there is too much grease it'll end up there. Hope this helps. I own older grizzlies and that is what has worked for me.
×