20 Most Recent
Yamaha 2007 Grizzly 350 Auto 4x4 Questions & Answers
ATV Yamaha Grizzly 350 2007 will not start
Sounds like it has sat for a while and your jets are gummed in the carb there is a you tube video on this topic that will walk you through the repair other thing to check turn fuel tank valve to off position remove fuel hose at carb slowly turn valve on to see if you have fuel to the carb if there is fuel there turn valve off install hose back on carb remove remove hose at tank valve now on the bottom of the carb you will see a plug or screw loosen this ( there may be fuel running out of drain hose have a bucket to catch fuel) now on the hose at tank valve blow threw it ( do not use air compressor) air should blow freely if it dose not your needle valve is stuck and there is no fuel getting to the carb or stuck float or a hole in the float and full of fuel
Yamaha valve adjustment
Hey Anon, this is NOT something to "try and learn" how to do..find a professional that is will to tutor you when you do this for the first time!
It COULD save you A LOT of $$$$!!!!!
9/15/2018 12:22:31 AM •
Yamaha ATVs
•
Answered
on Sep 15, 2018
Starts fuel starved
Check the fuel flow through the tank valve. There are screens inside the tank that may be blocked and restricting flow.
9/29/2014 12:46:54 AM •
Yamaha ATVs
•
Answered
on Sep 29, 2014
Can't find how to trouble shot the horn on my 2015 Kawasaki mule
take off the horn unit power it direct if it works its ok, if not replace, next step wire a small bulb into the horn wires and press the button if it lights the switch is ok, if you have a circuit tester put one end on the battery ground and check for power in the horn wires if their is power there put the lead on battery positive and press the horn button if there is no power their the switch or wiring is faulty
4/16/2024 10:19:40 PM •
ATVs
•
Answered
2 days ago
Not finding what you are looking for?