2
Wendl Ormsby posted an answer for this Yamaha Motorcycles:
"That sounds like a fuel starvation problem, Felipe. It could be your fuel filter or even..."
Wendl Ormsby
Wendl Ormsby posted an answer for this Cars & Trucks:
"Sounds like a classic case of a corroded battery terminal. Take them off, scrape them..."
Wendl Ormsby
Wendl Ormsby posted an answer for this The Computers & Internet:
"Yes. PayPal is an awesome service that has never let me down or disappointed me."
Wendl OrmsbyWendl Ormsby posted an answer for this Cars & Trucks:
"I would replace that switch first thing since there is nothing that can make it stay "on"..."
Wendl Ormsby
Wendl Ormsby posted an answer for this 2003 Chevrolet Chevrolet TrailBlazer:
"Since GM has been having so much misery with their ignition switches lately, I would..."
Wendl Ormsby
Wendl Ormsby posted an answer for this 2002 Ford E350:
"Check to see if your inertia switch has been activated. If so, just find it and reset it...."
Wendl Ormsby
Wendl Ormsby posted an answer for this 2002 Ford F-150:
"Google: "fuse diagrams for ford f150""
Wendl OrmsbyWendl Ormsby posted an answer for this Ford Cars & Trucks:
"Google: "fuse diagrams for ford f150""
Wendl OrmsbyWendl Ormsby posted an answer for this Ford Cars & Trucks:
"Have you tried to get an Owner's Guide at a Ford dealership? If you have one already,..."
Wendl Ormsby
Wendl Ormsby posted an answer for this 2000 GMC Yukon XL:
"Make sure that your battery cables are clean where they contact the battery posts or..."
Wendl Ormsby
Wendl Ormsby posted an answer for this 2005 Kia Optima:
"Did you change the fuel filter too? If so, go forward to your fuel pressure regulator."
Wendl Ormsby
Wendl Ormsby posted an answer for this 2001 Ford Taurus:
"My '04 Taurus did the same thing a while back and it was due to a baked O-Ring that seals..."
Wendl OrmsbyWendl Ormsby posted an answer for this Ford Cars & Trucks:
"Find an AutoZone, or any of the many auto repair shops that can scan your ECU for you,..."
Wendl Ormsby
Wendl Ormsby posted an answer for this 2007 Ford F-350 Super Duty:
"Your owners manual should explain what programs are available for your 350, Timm."
Wendl OrmsbyWendl Ormsby posted an answer for this Ford Cars & Trucks:
"If you Expedition is anything like my '99 Ranger, you have to have your foot on the brake..."
Wendl Ormsby
Wendl Ormsby posted an answer for this 2008 Chevrolet Impala:
"As with all modern cars, the transmission has to be in "PARK" before their ignition switch..."
Wendl OrmsbyWendl Ormsby posted an answer for this Chevrolet Cars & Trucks:
"The timing marks on that engine can be found on the vibration damper/pulley, on the front..."
Wendl Ormsby
Wendl Ormsby posted an answer for this 1974 Chevrolet Impala:
"That sounds like the positive (+) wire from your CD player is connected to a power source..."
Wendl OrmsbyWendl Ormsby posted an answer for this 1995 Chevrolet Silverado 2500:
"That info is in your owner's manual. If you don't have one, get a shop manual from..."
Wendl Ormsby
Wendl Ormsby posted an answer for this 2007 Chevrolet Epica 2.0:
"Have you had it scanned? It might be something as simple as a bad knock sensor which is..."
Wendl Ormsby
Wendl Ormsby posted an answer for this 2013 Chevrolet Camaro:
"You don't. Your ECU (computer) controls its timing. You might look into a computer chip to..."
Wendl OrmsbyWendl Ormsby posted an answer for this Chevrolet Cars & Trucks:
"Take a look at your linkage first...it may have been bent while off-roading."
Wendl OrmsbyWendl Ormsby posted an answer for this Chevrolet Cars & Trucks:
"Before you replace them, try a quart of HyperLube first....be sure you drain a quart of..."
Wendl OrmsbyWendl Ormsby posted an answer for this 1987 Chevrolet Caprice:
"Have you called the shop that rebuilt your trans? If it was ok before the re-build, then..."
Wendl OrmsbyWendl Ormsby posted an answer for this 1972 Oldsmobile 98:
".016" - .018" Stuart. The smaller the gap the more dwell you will have, which is good...."
Wendl OrmsbyWendl Ormsby posted an answer for this 2003 Chevrolet Chevrolet TrailBlazer:
"Pull off the valve cover, clean it like new, then use a silicone sealer on the valve cover..."
Wendl OrmsbyWendl Ormsby posted an answer for this Suzuki Motorcycles:
"NGK plugs are the best ever for Japanese bikes. Google NGK.com and search for your make..."
Wendl OrmsbyWendl Ormsby posted an answer for this Sym Motorcycles:
"I would drill it with as small of a drill bit that would make it round, then tap it with..."
Wendl OrmsbyWendl Ormsby posted an answer for this Suzuki Motorcycles:
"Is that a question or a statement? If it has an anti theft device, try disconnecting it...."
Wendl OrmsbyWendl Ormsby posted an answer for this Honda Motorcycles:
"That sounds like a bad/corroded ground cable from the battery to the engine, Anon."
Wendl Ormsby
Wendl Ormsby posted an answer for this 2003 Yamaha YZF-R6:
"Look for a loose ground inside of your instrument cluster, Anon."
Wendl Ormsby
Cars & Trucks 29 answers
Motorcycles 6 answers
Computers & Internet 1 answer
