Tailoring and Sew Much More
Anonymous posted an answer for this Brother XL-5130 Mechanical Sewing Machine:
"The three front dials are as follows....left to right-Stitch width, type of stitch, and..."
Anonymous posted an answer for this Brother XL-5130 Mechanical Sewing Machine:
"Just hold the spool with a dowel or pencil and apply pressure on the thread coming off the..."
Anonymous posted an answer for this Janome 1017 Mechanical Sewing Machine:
"Check to make sure it is threaded through all of the threading points and that it is..."
Anonymous posted an answer for this Janome 1017 Mechanical Sewing Machine:
"Are you using heavy thread for the top stitching? If so you will need to tighten the top..."
Anonymous posted an answer for this Necchi 3537 Mechanical Sewing Machine:
"Sounds like the needle is hitting the bobbin casing. Take it out and re-seat it. Check..."
Anonymous posted an answer for this Singer Sewing Machines:
"Make sure needle is facing the right direction. Goove of the needle to the front. If..."
Anonymous posted an answer for this Bernina Sewing Machines:
"Blue red green yellow threading order is very important. Pull all threads from eye of the..."
Anonymous posted an answer for this Brother Sewing Machines:
"Have you tried raising the foot with your knee lift and at the same time by hand lower the..."
Anonymous posted an answer for this Necchi Sewing Machines:
"Make sure needle is not in backwards. Groove of the needle to the front. If that is ok you..."
Anonymous posted an answer for this Euro-Pro 416 Mechanical Sewing Machine:
"have you tried the schmetz needles found at all fabric stores?"
Anonymous posted an answer for this Husqvarna Designer I:
"This happened to me. My sewing machine repair man opened it up and found where two wire..."
Anonymous posted an answer for this Kenmore 12102:
"The bes way to hem a t-shirt on a household machine is to use a double needle, straight..."
Anonymous posted an answer for this Kenmore 12102:
"Check the needle, make sure it is not in backwards. Groove in the needle to the front. If..."
Anonymous posted an answer for this Kenmore 12102:
"Are you sure the machine is threaded properly? Try tightening the tension. And make sure..."
Anonymous posted an answer for this Sewing Machines:
"What needs to be adjusted? First of all make sure you have it threaded correctly. There..."
Anonymous posted an answer for this Breville BKC600XL Coffee Maker:
"As others have said...just keep reseating the water tank, 20-30 times may be necessary...."