2sewing machine help here!
Anonymous posted an answer for this White Sewing White 4400 Computerized Sewing Machine:
"I do not think that model machine can be slowed down. It does it's own thing so far as..."
Anonymous
Anonymous posted an answer for this Baby Lock Evolve:
"Push the looper lock button in firmly and rotate the handwheel towards you and it will..."
AnonymousAnonymous posted an answer for this Baby Lock Evolve:
"First, change the needles making sure to use the el705 needle system. Second, make sure..."
Anonymous
Anonymous posted an answer for this Brother XR-65t Mechanical Sewing Machine:
"If you are quilting and using the walking foot than no. If you want to do stippling or..."
Anonymous
Anonymous posted an answer for this Dirt Devil M086700 Vision Bagless Upright Vacuum:
"Sounds like it is stopped up. The vac gets overheated and the thermal switch does its..."
AnonymousAnonymous posted an answer for this Sewing Machines:
"There are really not any #s you can set to give a good stitch. You have to just use the..."
AnonymousAnonymous posted an answer for this Brother XR-65t Mechanical Sewing Machine:
"The reverse mechanism is stuck. The machine has to be completely disassembled to get to..."
Anonymous
Anonymous posted an answer for this Singer 3116 Simple:
"I can give you a REALLY long answer or a short one. If you really want to solve your head..."
Anonymous
Anonymous posted an answer for this Singer 14SH654:
"Some controllers have some adjustment for speed others do not. Depends on the type of..."
AnonymousAnonymous posted an answer for this Singer Sewing Machines:
"Timing is not correct."
AnonymousAnonymous posted an answer for this Bernina Sewing Machines:
"You diagnosed it yourself! If it works with a new 180 pedal than it is the pedal."
Anonymous
Anonymous posted an answer for this Brother Disney PE-400D Computerized Sewing Machine:
"If you take the face plate off (left side cover) there is usually a small sensor "lever"..."
Anonymous
Anonymous posted an answer for this Singer CE-100 Futura Computerized Sewing Machine:
"I am not 100% sure on this machine but on most emb. machines they have a sensor connected..."
AnonymousAnonymous posted an answer for this Kenmore Sewing Machines:
"Rethread the machine. If you are threading it correctly the bobbin case may have gotten..."
Anonymous
Anonymous posted an answer for this Sew Pro QuickStitch SP-402 Mechanical Sewing Machine:
"Nope it has a bobbin. Albeit a big bobbin sometimes. If it fed off a cone it would be..."
AnonymousAnonymous posted an answer for this Husqvarna Designer I:
"If I recall correctly it is all new software. Dongles are not sold separately. Viking..."
AnonymousAnonymous posted an answer for this Husqvarna Designer I:
"You can get the floppy drive replaced. I did tons of them! I don't think it is you. ..."
AnonymousAnonymous posted an answer for this Baby Lock Imagine:
"This is an expensive machine and I would let a good dealer look at it. It could cost you..."
AnonymousAnonymous posted an answer for this Husqvarna Huskylock Computerized 910:
"Babylock is the best IMHO. A bit more expensive but like anything you get what you pay..."
AnonymousAnonymous posted an answer for this Baby Lock Eclipse Serger:
"You need to contact a Babylock dealer. I am one. [email protected]"
Anonymous
Anonymous posted an answer for this Janome Mini Compact:
"It first needs to be determined if the needle bar is off or the hook. Most likely the..."
AnonymousAnonymous posted an answer for this PfaFF Sewing Machines:
"If this is what I think it is you need to take this to a Pfaff dealer. It is a tricky..."
Anonymous
Anonymous posted an answer for this Brother LS-1217 Mechanical Sewing Machine:
"Make sure the machine is threaded correctly. Make sure the needle is in the machine..."
Anonymous
Anonymous posted an answer for this Vacuums:
"Clean or replace the separator under the main motor. Brushroll may be worn and needs to..."
AnonymousAnonymous posted an answer for this Vacuums:
"Change the belt/s. It does not have to be broken to not function properly."
AnonymousAnonymous posted an answer for this Brother LS-1217 Mechanical Sewing Machine:
"Change the needle first and make sure it is inserted correctly. Use good thread i.e.:..."
AnonymousAnonymous posted an answer for this Brother Sewing Machines:
"Large loose loops are a sure sign that it is not receiving any top tension. Re thread and..."
AnonymousAnonymous posted an answer for this Necchi Sewing Machines:
"make sure the pattern selector is set for straight stitch first. If it is set correct..."
AnonymousAnonymous posted an answer for this Sewing Machines:
"I have them. email: [email protected]"
AnonymousAnonymous posted an answer for this Husqvarna Viking 1:
"bbragg77 is mostly correct. It is not the camstack. Although they will crack, but that is..."
AnonymousAnonymous posted an answer for this Husqvarna Viking 1:
"It could be the touch panel or the main board. The touch panel ribbon connector could be..."
Anonymous
Sewing Machines 42 answers
Vacuums 4 answers
