Press enter to search.
Using knowledge and experience to help you.
Rick Kasper posted an answer for this Sharp AR-5316 Advanced Digital Imager Copier:
"Most likely need to replace the developer"
copyTEQ posted an answer for this Sharp AR-507 Copier:
"I have a Sharp AR-407 and after filling with more toner now gives me error message..."
Rick Kasper posted an answer for this Sharp AL 1631 Copier:
"Check under the scanner, there is a scanner lock that you may have hit removing copies...."
"Its a Sharp AL-1631. It'll copy from the auto feed but will not copy from the glass...."
Rick Kasper posted an answer for this Gestetner DSM 651 Copier:
"I have a Gestetner DSm651sp and it is giving me an error code of sc495, I recently..."
"Most likely the toner dispenser is blocked. Its not getting the ink into the system. Did..."
Rick Kasper posted an answer for this Xerox CopyCentre C128 Black and White Copier:
"The fuser is not warming up properly. Could have paper wrapped around it, but most likely..."
"msir machine show error code of 010-327. plese tell me error solu."
Rick Kasper posted an answer for this Ricoh Aficio 1018D Copier:
"unplug it and take off the front cover, there are 2 interlock switches behind the cover..."
Rick Kasper posted an answer for this Xerox WorkCentre M-24 Color Copier:
"Solutions for : How To Print Envelopes Using the PCL Printer Driver on a Workstation With..."
"Please help me I need to print envelopes with my xerox work centre how can I"
Rick Kasper posted an answer for this Xerox Office Equipment & Supplies:
"Enter UI Diagnostic Mode. Press the Log In/Out button on the Control Panel Select System..."
"My Xerox WorkCentre M123 does not enter in more ways
administrator password is 11111 and..."
"Better off replacing it, if you google it , the price normally is $20 or less. But you can..."
"How do I empty the waste on a xerox 7120"
Rick Kasper posted an answer for this Xerox DocuColor 12 Color Copier:
"Probably a dirty or bad IBT sensor."
"xerox dc 12 paperjam 8-163"
"That is the fuser exaust fan. It either is running to slow or not running at all. The..."
Rick Kasper posted an answer for this Xerox C2424 Copier:
"flashing message "service needed" code 37,002.47:64712"
"That is a jet stack heat error. Most likely problems Bad Ink Loader Bad Print Head Bad Pre..."
Rick Kasper posted an answer for this Xerox WorkCentre M123 Copier:
"Would be easier and cheaper to buy a new machine. You have to replace a ton of parts that..."
"c123 convat to128"
"J7 means the copy cartridge, ( drum unit) needs to be replaced or rebuilt."
"XEROX 212 J 7 PROBLEM"
"7435 is located on the upper left side of the machine, Should have a yellow guide on it, 2..."
"I have a Xerox 7345 Workcentre and need to replace the Fuser Assembly but it's not..."
Rick Kasper posted an answer for this Sharp AR-275 Copier:
"in order press * Entering the simulation mode 1) #/P key (program) ON â?? Asterisk..."
"Sharp AR275 copier error message received is "call for service u2-40" please..."
"Normally one of these two problems. Exposure lamp defective â?¢ Dirty white..."
"in a 1018 machine i have an SC 194 code- functional problem"
Load more activity...
1,024,018 people helped
View all achievements