1
tony_tc1 posted an answer for this Singer Sewing Machines:
"check out top thread tensioner, could be loose, so thread will pile up in bobbin area."
tony_tc1
tony_tc1 posted an answer for this Heating & Cooling:
"Totally agree with Thomas Woodburn, it has lost coolant due to the badly flared pipe..."
tony_tc1
tony_tc1 posted an answer for this Kenmore 15218 Mechanical Sewing Machine:
"check out if the needle is faceing the right way, otherwise when the needle goes down it..."
tony_tc1tony_tc1 posted an answer for this Hitachi Heating & Cooling:
"to completly remove ,you first have to get the gas back into the external unit,"
tony_tc1tony_tc1 posted an answer for this Heating & Cooling:
"It normally means that the external unit is overheating,but if the unit doesn't work at..."
tony_tc1tony_tc1 posted an answer for this Sewing Machines:
"Could be any one of these .- 1) check needle is in right direction. 2) if needle in right..."
tony_tc1tony_tc1 posted an answer for this Sewing Machines:
"could be for varied reasons, 1). top tension too tight. 2). needle not ruined. 3). crochet..."
tony_tc1
tony_tc1 posted an answer for this Drills:
"can i charge milwaukee 18v nicad batt. with a AEG BL9618 charger without any problems...."
tony_tc1
tony_tc1 posted a question about IBM ThinkPad T22 Notebook:
"with ac adapter connected the laptop(IBM T22), shows low battery and then switches off,..."
tony_tc1
Sewing Machines 4 answers
Heating & Cooling 3 answers
Drills 1 answer
