Tony Marley posted an answer for this Kenmore Dryers:
"You have the right idea in the door switch as a place to start and yes it can be jumped or..."
Tony Marley posted an answer for this Kenmore Dryers:
"Not knowing anything about your dryer, such as model number or age and when the last time..."
Tony Marley posted an answer for this Kenmore 15762 Dishwasher:
"The lower spray arm being loose is a normal condition. The first thing that needs to be..."
Tony Marley posted an answer for this Kenmore 13763 Stainless Steel Dishwasher:
"I would replace the sump assembly in this case as the motor is $118 and the seals and..."
Tony Marley posted an answer for this Kenmore 15912 Built-in Dishwasher:
"My best guess is the door latch or door latch switch is not working properly. Once the..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"The first thing to do is visually check to make sure the water connections from the sump..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"To give you proper information the model number would be very helpful. Please resubmit"
Tony Marley posted an answer for this Kenmore Elite 24" Built-In Dishwasher with Ultra Wash HE:
"The most common problem with the door not latching is the top rack not being completely in..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"If you broke a glass, the odds are that a piece of glass has jammed the impeller on the..."
Tony Marley posted an answer for this Kenmore 24 in. 17602 / 17604 / 17609 Built-in Dishwasher:
"There was a recall on certain models of Kenmore dishwashers. This recall was to replace..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"If you go to www.partsdirect.com you should find the answers you need Water Filters Lawn..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"The first question I have is did this issue start after a garbage disposal was installed?..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"This is a job that you can do, but take your time. First there is a pedal repair kit that..."
Tony Marley posted an answer for this Kenmore 15899 Built-in Dishwasher:
"I would put a bowl with about a cup of white vinegar in the top rack along with your..."
Tony Marley posted an answer for this Kenmore 24 in. 16182 / 16189 Built-in Dishwasher:
"My guess is the bearings in the wash pump are bad. This does not happen very often and..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"I have attached a link that should help..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"The most likely culprit is the heating element. Most of the time with a close visual..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"Not using all the buttons from time to time can be a problem as moisture can get into the..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"I believe the thermal fuse on this one is actually incorporated in a harness part..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"There are a couple of possibilities. To test first unplug the unit for safety. then you..."
Tony Marley posted an answer for this Kenmore Dishwashers:
"If you go to partsdirect.com there should be one available. Water Filters Lawn Garden..."
Tony Marley posted an answer for this Bosch Dishwashers:
"This is a computer error and really needs to be tested by an authorized repair company...."
Tony Marley posted an answer for this Kenmore Dishwashers:
"Without hearing the noise I would guess the bearings in the wash pump are going bad. This..."
Tony Marley posted an answer for this Refrigerators:
"I am sorry without the model number we would not be able to give proper information as..."
Tony Marley posted an answer for this Refrigerators:
"Some ice makers will take up to hours to produce the first time, but without the..."
Tony Marley posted an answer for this Kenmore Refrigerators:
"To have the model number would be very helpful to give you the correct information."
Tony Marley posted an answer for this Washing Machines:
"I have attached a video which should help you https://www.youtube.com/watch?v=TCh5UzTiVVU"
Tony Marley posted an answer for this Samsung Washing Machines:
"If you look closely at the control panel you will see a small lock emblem by one of the..."
Tony Marley posted an answer for this Washing Machines:
"In order to help you properly we would need the model number. Usually you will find it on..."
Tony Marley posted an answer for this Washing Machines:
"The motors on these machines are pretty sturdy and I would check a couple of things before..."