1
shadapar posted an answer for this Riso RZ220 Duplicator:
"Master positioning sensor is on after cut. Either your cutter has stalled (open the master..."
shadapar
shadapar posted an answer for this Savin 2513 Black Toner Cartridge Genuine:
"Most of the time it's the fuser. Measure or mark edge to edge and make a tube. That's the..."
shadaparshadapar posted an answer for this Riso Office Equipment & Supplies:
"Remove screen and clean all four surface with isopryl alcohol as well as drum..."
shadapar
shadapar posted an answer for this Xerox Phaser 3250D Laser - Monochrome Laser - 30 ppm Mono - 1200 dpi - USB - PC, Mac Printer:
"If youve changed the toner, most likely the fuser is causing the error and will need to be..."
shadaparshadapar posted an answer for this Riso RZ390 Duplicator:
"Chances are good the clutch does need to be replaced. These are magnetic and while they..."
shadaparshadapar posted an answer for this Riso Office Equipment & Supplies:
"This model is pretty obsolete, finding someone to service it will be difficult, and most..."
shadapar
shadapar posted an answer for this HP LaserJet 4100n Printer:
"This could be several things. But most are firmware related Unplug it from the network..."
shadapar
shadapar posted an answer for this Xerox Phaser 3600DN Laser Printer:
"the smps power supply needs to be replaced. it should clear with a power cycle but it WILL..."
shadaparshadapar posted an answer for this Xerox Phaser 3600DN Laser Printer:
"the thermistor and/or fuser need to be replaced"
shadapar
shadapar posted an answer for this Kyocera FS-4000DN Laser Printer:
"you can clear the Maintenance message by scrolling down to service/Maintenance menu. I..."
shadaparshadapar posted an answer for this Kyocera FS-4000DN Laser Printer:
"pull the toner and developer (they come out as one unit unless you delibrately seperate..."
shadaparshadapar posted an answer for this Kyocera FS-4000DN Laser Printer:
"ull the toner and developer (they come out as one unit unless you delibrately..."
shadapar
shadapar posted an answer for this Kip 7100 Toner:
"Corona wires need to be replaced, or developer rollers are worn. Wires are the cheapest to..."
shadapar
shadapar posted an answer for this Xerox WorkCentre 3220:
"Update your firmware, follow the steps included in the zip available at www.xerox.com. Or..."
shadapar
shadapar posted an answer for this Xerox 6400/XF Color Laser Mfp Workcentre 6400:
"I hate to say this, but chances are either the software is corrupt or one of the two ..."
shadapar
shadapar posted an answer for this Canon FAXPHONE L80 Laser:
"ECM is basically error correction mode. Tx is transmission. If you're having trouble..."
shadaparshadapar posted an answer for this Riso RZ220 Duplicator:
"D-17 indicates incorrect master roll. there's several possibilites for this. the mosty..."
shadaparshadapar posted an answer for this Muratec MFX-1430 Copier:
"Try at own risk. Pull the toner cartridge. Look on the back. You'll see a long and short..."
shadaparshadapar posted an answer for this Riso RZ220 Duplicator:
"Do not attempt this unless your skill level is. Higher than average and you dont mind..."
shadaparshadapar posted an answer for this Riso RZ220 Duplicator:
"go to driver downloads at riso.com and download the riso admin tool. much easier than the..."
shadaparshadapar posted an answer for this Office Equipment & Supplies:
"Push process and image while powering on"
shadapar
Office Equipment &... 22 answers
