Robert V posted an answer for this Kirby Heritage II Vacuum:
"The brushroll is held onto that baseplate by the metal brackets on either end of it. You..."
Robert V posted an answer for this Kirby Ultimate G Bagged Upright Vacuum:
"Servicing what part of the machine? Can we get more info?"
Robert V posted an answer for this Shop Vac Vacuums:
"You can do that but you absolutely shouldn't. The filter is what prevent particles from..."
Robert V posted an answer for this Eureka 431A Optima Bagless Upright Vacuum:
"Eureka 431 Optima Vacuum Cleaner Brush Roll Belt Replacement Part I believe this is what..."
Robert V posted an answer for this Hoover U5444-900 5100 Wind Tunnel 15 Inch Wide Hepa Filter Bagged Black VacuumVacuum:
"If its brand new there may still be a piece of tape holding it shut. It sounds silly but..."
Robert V posted an answer for this Hoover U4270-930 Vacuum:
"Check all the wheels to see if they turn freely. Perhaps one is just hung up."
Robert V posted an answer for this Hoover Vacuums:
"It may not be safe to use anymore, the motor may be failing from the water intrusion."
Robert V posted an answer for this Eureka 1934 Bagged Upright Vacuum:
"Blowing air out of the right side? As in blowing air out of the right side of the hood? If..."
Robert V posted an answer for this Oreck XL21 Bagged Upright Vacuum:
"Its not to difficult, its just requires some patience. The first thing Ill recommend is..."
Robert V posted an answer for this Kenmore Vacuums:
"What is the model number of your machine?"
Robert V posted an answer for this Hoover Vacuums:
"You'll need a new switch, try these schematics. Hoover U5491 900"
Robert V posted an answer for this Hoover U5491-900 Bagged Upright Vacuum:
"Hoover U5491 900 Give this a try."
Robert V posted an answer for this Kirby Vacuums:
"Odd, could be one of the safety switches where the nozzle or emptor connects. How long has..."
Robert V posted an answer for this Royal Vacuums:
"Yes, ones standard filtration the other is microfilter material."
Robert V posted an answer for this Electrolux Vacuums:
"The power switch has failed if it wont depress. As for the change bag light, its a little..."
Robert V posted an answer for this Kirby Ultimate G Bagged Upright Vacuum:
"Its not a simple fix, it will involve some disassembly of the motor unit, especially if..."
Robert V posted an answer for this Kirby Vacuums:
"Its been awhile since I pulled one of those apart but I had a similar issue with a G and..."
Robert V posted an answer for this Top Vacuums:
"Yes, you need to use the foam filter to act as a break for incoming water or it will just..."
Robert V posted an answer for this Bissell Vacuums:
"The Bissell Gemini carpet sweeper? Those are practically antiques now but they are the..."
Robert V posted an answer for this Oreck Vacuums:
"The edge brushes have a single screw that holds each one in. They are readily available on..."