Press enter to search.
Douglas Plant posted an answer for this Singer Sewing Machines:
"It sounds like a mechanical issue, when the machne starts to slow, stop using the control..."
Douglas Plant posted an answer for this Husqvarna Sewing Machines:
"Remove the cover on the left side of the arm and there is a knob that you push to the..."
Douglas Plant posted an answer for this Elna Sewing Machines:
"It sounds like you have a broken can gear, if you have it repaired be sure it is done by..."
Douglas Plant posted an answer for this Sewing Machines:
"I do not believe that the parts are available now."
"You will need a Mac version of the Viking software."
"It is on the bottom of the machine"
Douglas Plant posted an answer for this New Home Sewing Machines:
"Try removing the cover plate on the bottom of the free arm and cleaning out the lint and..."
"Go to Vikings web site, then software support and you should find the drivers there."
Douglas Plant posted an answer for this Husqvarna Viking Emerald 116 Sewing Machine:
"Try using a Schmetz stretch needle size 11 )7015-HS)"
"Try using a needle for metallic thread, the eye is larger and may help"
Douglas Plant posted an answer for this Janome Sewing Machines:
"I would try a new bobbin case, it would be the easiest thing to try and do,"
"It Will be a Hi shank...one did come with the machine,"
"Buy a new plate"
"15-91 is full size."
Douglas Plant posted an answer for this Brother Sewing Machines:
"Sounds like your bobbin tension is too loose."
"Normally this is caused by the upper thread not being threaded correctly. It is not on the..."
"That means your bobbin case tension is too tight."
"Go to Singers website and instruction books can be downloaded there."
"If the bobbin has thread on it, remove the thread so the bobbin is empty, it should pull..."
"If you will very carefully pry up the bobbin winder base by using pressure on both sides..."
"You can go the the Janome web site to find drivers for your computer. When you save..."
"When you purchased the software it came with an activation code. Just re-enter the code."
"There are two devices on the underside of the carriage that reads the movement. It sounds..."
Douglas Plant posted an answer for this Baby Lock Sewing Machines:
"That is a fairly common issue on that model. The feed system seizes from a lack of..."
"Next time it does it try remove the foot control cord to see if it stops. If it stops then..."
"You probably do not have the correct fuse, it is a slow blow type and difficult to find...."
"You have a sensor that is not working correctly, it would probably be best to take it to a..."
"There are two main reasons to cause this to happen, the pattern selector is lined up on..."
"Your thread may be too large for the machine to use. Try using the highest setting on the..."
"To increase the tension, turn it clockwise."
"It sounds like the needleis not installed correctly, check the manual for the proper..."
Load more activity...
38,961 people helped
View all achievements