You really need at least a basic understanding of mechanics, that would be good :)
oneStan posted an answer for this Cars & Trucks:
"If the belt has fallen off there must be a problem. The don't just fall off of the car..."
oneStan posted an answer for this GMC Cars & Trucks:
"Good place to get a vacuum gauge hooked up and identify problems using that tool. Without..."
oneStan posted an answer for this Isuzu Cars & Trucks:
"Your light switch controls those items, it may be defective."
oneStan posted an answer for this Nissan Cars & Trucks:
"If they are saying the rear lock assembly is not working then you can go to a salvage..."
oneStan posted an answer for this Dodge Cars & Trucks:
"Run a compression test as well as testing with a vacuum gauge and you will find your..."
oneStan posted an answer for this Cars & Trucks:
"A backfire usually indicates a timing issue or having the wrong plug wire on a spark plug."
oneStan posted an answer for this Craftsman Garden:
"It could be due to: Fuel restriction Low engine compression / worn engine components Worn..."
oneStan posted an answer for this The Computers & Internet:
"It's probably the switch since the bulb is new. I would try one other bulb just to be..."
oneStan posted an answer for this The Computers & Internet:
"Level the machine"
oneStan posted an answer for this Microwave Ovens:
"The circuit is overloaded. Try another outlet that is not connected to the same fuse. If..."
oneStan posted an answer for this Olevia Televison & Video:
"Change the input to ANT, scan the channels, watch free TV."
oneStan posted an answer for this Beltronics STI Driver Radar Detector:
"Check the voltage coming out of the charger to be sure it is working. You'll need a..."
oneStan posted an answer for this Viper 350 HV ESP Security System 350HV ESP Security System:
"The valet button location is decided by the installer and is usually hidden. Find the..."
oneStan posted an answer for this Vehicle Parts & Accessories:
"Find the control unit and follow the 2 lead wire to the valet button. They can be placed..."
oneStan posted an answer for this Baby Trend Passport Stroller:
"More time"
oneStan posted an answer for this Mazda Cars & Trucks:
"You will find them in the valve body assembly. You'll need to remove the pan for access."
oneStan posted an answer for this Miscellaneous:
"Just go to the fuse box and remove the fuse for the radio, or, pull the radio out and..."
oneStan posted an answer for this Cars & Trucks:
"Have you checked to make sure the catalytic converter is not plugged? If you've replaced..."
oneStan posted an answer for this Nissan Cars & Trucks:
"As long as there is no issue with the pressure plate/clutch being completely released when..."
oneStan posted an answer for this Miscellaneous:
"The timing chain/belt more than likely needs to be replaced."
oneStan posted an answer for this 2005 Dodge Durango:
"You need new internal seals or a replacement transmission."
oneStan posted an answer for this Mazda Cars & Trucks:
"1. Make sure you have sufficient lubricant in the transmission. 2. Manual transmissions..."
oneStan posted an answer for this Nissan Cars & Trucks:
"Based upon your limited information: You need to talk to a Nissan mechanic, none of that..."
oneStan posted an answer for this Cars & Trucks:
"All of them. If one has worn then the rest have worn. Generally, the gap widens as the..."
oneStan posted an answer for this A1 Cardone 1977 - 1979 Lincoln Mark V Brake Master Cylinder Bleeding Tool Cardon:
"Time to replace the master cylinder."
oneStan posted an answer for this Crime Stopper CrimeStopper SP300:
"Check your fuse."
oneStan posted an answer for this Vehicle Parts & Accessories:
"It's not picking up the Tach signal. Check that specific wire to make sure it's installed..."
oneStan posted an answer for this Cars & Trucks:
"You have not provided any specific vehicle identification. Every vehicle has a different..."