Socrates at Heart, and Plato in mind.
Stan Skaggs posted an answer for this Whirlpool Dryers:
"might want to check your lint filter. After that check your exhaust tubing incase lint..."
Stan Skaggs posted an answer for this Car Audio & Video:
"Maybe you need to check your satellite antenna?? You said your GPS is working good? See..."
Stan Skaggs posted an answer for this MDT Harvey Hydroclave SC8:
"need to clean your screens and filters.. also clean out your chamber and pay attention to..."
Stan Skaggs posted an answer for this MDT Harvey Hydroclave SC8:
"here is the operator manual for the MC8..."
Stan Skaggs posted an answer for this MDT Harvey Hydroclave SC8:
"check you filters and the bellows in the back."
Stan Skaggs posted an answer for this MDT Harvey Hydroclave SC8:
"you need to look at the end of the operator manual.. look here on the last few pages to..."
Stan Skaggs posted an answer for this MDT Harvey Hydroclave SC8:
"This manual tells you exactly what to change to make it..."
Stan Skaggs posted an answer for this Cars & Trucks:
"the AC draws power from the engine as the clutch is engaged on the compressor. The dip in..."
Stan Skaggs posted an answer for this Westinghouse Televison & Video:
"it is the little long board mounted on the side of the monitor. you can identify it by..."
Stan Skaggs posted an answer for this LG Flatron W2242P-SF 22" Monitor:
"safemode is used if wrong drivers are in use.. check your drivers nad reboot,, when..."
Stan Skaggs posted an answer for this LG Flatron L1511S 15" Flat Panel LCD Monitor:
"lower your resolution to VGA and work your way up. Note that if you choose differnt..."
Stan Skaggs posted an answer for this LG Computers & Internet:
"are you in dual screen mode on a laptop possibly? Check that the laptop is dual enabled..."
Stan Skaggs posted an answer for this LG Flatron L1951S-SN 19" LCD Flat Panel Monitor:
"do you have speakers on your monitor? If yes, check the wire connecing hte sound to the..."
Stan Skaggs posted an answer for this LG Computers & Internet:
"you need to look at the geometry settings on the video driver on your computer to find the..."
Stan Skaggs posted an answer for this LG Computers & Internet:
"check your VGA cable and connector that it is securely connected. Sounds like the blue is..."
Stan Skaggs posted an answer for this LG Flatron N1910lzbf 19 Led Lcd Monitor 43 5 Ms N1910lzbf:
"sounds like you are possibly over resolution (setting resolution higher than the monitor..."
Stan Skaggs posted an answer for this Computers & Internet:
"that is a windows screen and not the monitor. check to see if you are out of range on..."
Stan Skaggs posted an answer for this AOC 919SW-1 LCD Monitor:
"might be dust in the swites for the menu buttons.. try blowing out with air in a can..test..."
Stan Skaggs posted an answer for this Acer Computers & Internet:
"check your resolution and geometry. something is not right."
Stan Skaggs posted an answer for this Compaq Computers & Internet:
"the power supply is going out. Look at the capacitors on the power supply to see if the..."
Stan Skaggs posted an answer for this LG FLATRON W2361V 23 inch LCD Monitor:
"take off the stand and look around the edges where the front case meets the rear case..."
Stan Skaggs posted an answer for this Envision H190L Monitor:
"your buttons are broken or need to be jiggled around.. look at the physical state of the..."
Stan Skaggs posted an answer for this Envision 19" Widescreen Flat Panel LCD Monitor:
"check settings in menu. it seems you have settings for auto instead of adjustable."
Stan Skaggs posted an answer for this Envision G22LWK 22" LCD Monitor:
"your resolution is set too high.. change to VGA and move out from there. if the computer..."
Stan Skaggs posted an answer for this Envision G22LWK 22" LCD Monitor:
"is it turning off or going into sleep mode? If turning off, you have issues with the..."
Stan Skaggs posted an answer for this Envision H190L Monitor:
"look on the back for four screws that hold it on they should be in a square pattern which..."
Stan Skaggs posted an answer for this Envision EN-7100e 17" Flat Panel LCD Monitor:
"it is a setting in windows for the video properties.."
Stan Skaggs posted an answer for this Envision 19" Widescreen Flat Panel LCD Monitor:
"you are driving the monitor at too high of a resolution. lower it and see if the blue..."
Stan Skaggs posted an answer for this Envision Computers & Internet:
"it should be an option on the menu screen"
Stan Skaggs posted an answer for this Envision G22LWK 22" LCD Monitor:
"sounds like the flourescent back light is going out. If you are brave enough, open the..."
Stan Skaggs posted an answer for this Envision EN7410 17" LCD Monitor:
"should be four screws holding it on. Take them off and keep them safe. The monitor is..."