2Let me help you.
Elizabeth Hannan posted an answer for this Sewing Machines:
"Either you have a dull needle or there is too much tension on tension discs. Solution..."
Elizabeth Hannan
Elizabeth Hannan posted an answer for this Brother PC-420:
"Ok. It also could be that you are not completing one revolution of the balance wheel..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Ok. If the tension on the top is too loose you must tighten the tension control device and..."
Elizabeth HannanElizabeth Hannan posted an answer for this Bernina Sewing Machines:
"Try and open the machine and oil the lever. Or have your machine cleaned and oiled at the..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"There is an upper tension adjustment on the top of your machine usually located around the..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"You have to position it so that the prong on the outside of the bobbin case fits perfectly..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"The feed dogs are in darning mode. You must find the button to release the feed dogs."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Take your machine to a sewing machine repair technician. The machine cannot work like..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"There is always a special button that raises or lowers the feed dog. Yours is probably in..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"What did you wish to know about them?"
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Could be the top tension dial is too tight. Or, your needle has a barb on it that keeps..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Hello. Go to pattern envelop back and look for the size you are making at the top of the..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Thread tension on bobbin case may be too tight and choking the thread. Bobbin case is..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Ok, machine has seized up or the balance wheel has to be tightened. Therefore, you will..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Ok, yarn forward adds a stitch. Peso drops a stitch, no decreasing. One cancels the..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Ok, the feed dogs have been lowered and you must fine the lever that raises the feed dogs...."
Elizabeth HannanElizabeth Hannan posted an answer for this Bernina Sewing Machines:
"Ok, stop operation immediately. Threading is probably wrong or the machine could be out..."
Elizabeth HannanElizabeth Hannan posted an answer for this Bernina Sewing Machines:
"Ok, this is really a job for a sewing machine tech. This is very fine work that requires..."
Elizabeth HannanElizabeth Hannan posted an answer for this Omega Sewing Machines:
"Ok, thread is loopy because bottom tension is way too loose. Tighten the bottom tension...."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Ok, try tightening the tensions dials on the bobbin case and top threading."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Ok, it could be either a dull needle shredding the thread or the needle is inserted..."
Elizabeth HannanElizabeth Hannan posted an answer for this Bernina Sewing Machines:
"Ok, the needle may not be shoved up high enough into the needle shaft, or the bobbin may..."
Elizabeth Hannan
Elizabeth Hannan posted an answer for this Singer 3116 Simple:
"Question needs rephrasing; can't understand what help you need."
Elizabeth HannanElizabeth Hannan posted an answer for this Simplicity Sewing Machines:
"The thread probably had not gone through the threading eye of the upper looper."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Hmm. Raise the foot with the presser foot lever. You have to raise the foot up to get the..."
Elizabeth HannanElizabeth Hannan posted an answer for this Bernina Sewing Machines:
"Please tell me what kind of foot it is. Regular presser foot or a special task foot like..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Any place inside the machine where metal touches metal must be oiled with sewing machine..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"You're not pushing the bobbin case into its furthest location. The hook at the top of the..."
Elizabeth HannanElizabeth Hannan posted an answer for this Bernina Sewing Machines:
"Hello. There is a little button on the back of the machine bed facing away from you. Just..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"The top tension is way too tight. Dial a smaller number for the top tension. Or, tighten..."
Elizabeth HannanElizabeth Hannan posted an answer for this Sewing Machines:
"Sounds like the bobbin is either broken or not inserted correctly into the bobbin case."
Elizabeth Hannan
Sewing Machines 55 answers
Garden 1 answer
Televison & Video 1 answer
