Stitchit
ken dourof posted an answer for this Sewing Machines:
"Sounds like the tension is too tight or you are using an inferior thread or the needle is..."
ken dourof posted an answer for this Sewing Machines:
"Presser foot up, takeup lever at the top, thread the machine normally all the way and..."
ken dourof posted an answer for this Singer Sewing Machines:
"You may have the machine threaded wrong that is the only possible thing wrong or you may..."
ken dourof posted an answer for this Brother LS-1520 Mechanical Sewing Machine:
"You probably have thread stuck in the raceway"
ken dourof posted an answer for this Simplicity Denim Star SW210:
"Change the needle first failing that you will have to have the machine retimed"
ken dourof posted an answer for this Husqvarna Viking 1:
"You may have a problem with the foot control that will need looking at"
ken dourof posted an answer for this Sewing Machines:
"Only from the manufacturer"
ken dourof posted an answer for this Juki DDL-8300:
"If your machine is industrial you will need to look at the clutch linings"
ken dourof posted an answer for this Singer 3116 Simple:
"You will need a shop engineer I am afraid to take the machine apart to get to the problem"
ken dourof posted an answer for this Sewing Machines:
"On a mechanical machine the top camstack may be slightly out of line with the selector..."
ken dourof posted an answer for this Sewing Machines:
"The suppressor may have blown inside the foot control if the machine is running on, undo..."
ken dourof posted an answer for this Sewing Machines:
"I would get the pedal checked out you could have broken the ceramics inside"
ken dourof posted an answer for this Sewing Machines:
"Standard size from any sewing machine shop"
ken dourof posted an answer for this Sewing Machines:
"Not enough information I am afraid"
ken dourof posted an answer for this Sewing Machines:
"Your machine may need to be retimed"
ken dourof posted an answer for this Sewing Machines:
"Thread is probably jammed in the raceway area"
ken dourof posted an answer for this Brother Sewing Machines:
"New needle plate direct from Brother"
ken dourof posted an answer for this Sewing Machines:
"More information please"
ken dourof posted an answer for this Janome Sewing Machines:
"Frce the balance wheel backwards to unjam a possible thread jam"
ken dourof posted an answer for this Singer 3116 Simple:
"Keep adjusting the tensions top and bottom until you get it right"
ken dourof posted an answer for this White Sewing 1418 Mechanical Sewing Machine:
"The camstack is out of line with the selector bar in the top of the machine, you will need..."
ken dourof posted an answer for this Janome Sewing Machines:
"Need more information please"
ken dourof posted an answer for this Sewing Machines:
"Only from the dealer"
ken dourof posted an answer for this Sewing Machines:
"You may have to have the machine retimed if you have tried everything else"
ken dourof posted an answer for this Sewing Machines:
"Only from the dealer"
ken dourof posted an answer for this Necchi Sewing Machines:
"Only from a Necchi dealer"
ken dourof posted an answer for this Necchi Sewing Machines:
"If you do not have a button or lever on the outside you may have a button or lever under..."
ken dourof posted an answer for this Sewing Machines:
"You will have to look on line for manuals they are not supplied on this site which is for..."
ken dourof posted an answer for this Sewing Machines:
"Make sure you have a good needle in, failing that you may have to have the machine retimed"
ken dourof posted an answer for this Brother XL-2600:
"What exactly is happening ?"
ken dourof posted an answer for this Juki MO-644D Mechanical Sewing Machine:
"You have to be shown physically"