2Commercial Embroidery Services owner and operator, quilt maker and instructor
Chance Miller posted an answer for this Cars & Trucks:
"Sounds like your head is blown, Check oil for water mix. If water is in oil your radiator..."
Chance Miller
Chance Miller posted an answer for this General Electric Refrigerators:
"I think a door open sensor is not working properly??? If the door close sensor has failed,..."
Chance Miller
Chance Miller posted an answer for this General Electric Washing Machines:
"GE Washing Machines Not cool not good reviews, your issue mentioned in several ways. I..."
Chance MillerChance Miller posted an answer for this Washing Machines:
"Does it Hum or buzz when you begin the wash cycle? Just no water? is the supply valve..."
Chance MillerChance Miller posted an answer for this Cars & Trucks:
"U have used Qsee, Swann and Lorex. I have a PTZ that has worked on several systems. There..."
Chance Miller
Chance Miller posted an answer for this General Electric WSSH300G Front Load Washer:
"Most seals completely prevent clothing ie a tiny kids sock or other kids clothes. if it's..."
Chance Miller
Chance Miller posted an answer for this net10.com Cell Phones:
"Add a memory card with other music already on it. If your phone has a expansion memory..."
Chance Miller
Chance Miller posted an answer for this Eureka Vacuums:
"If you can hear the motor but the beater bar doesn't turn, it's the belt that needs..."
Chance Miller
Chance Miller posted an answer for this Singer 9960 - 9960 Quantum Stylist:
"This is a sign that your pedal may need to be repaired or replaced. Cheers, Embroidery..."
Chance Miller
Chance Miller posted an answer for this Sharper Image Tsi-11 The Shaper Metal Detector Express:
"Check online googling the make, model and series number to get the correct..."
Chance Miller
Chance Miller posted an answer for this Rowenta DG5030 Iron:
"I think lime and calcification are the culprit. Use some "CLR" at Home depot, can..."
Chance Miller
Chance Miller posted an answer for this Brother Sewing Machines:
"Check for proper threading of the machine, Making sure the groove of the needle is facing..."
Chance MillerChance Miller posted an answer for this Sewing Machines:
"Manuals are a wonderful..."
Chance MillerChance Miller posted an answer for this Sewing Machines:
"This should be in your Troubleshooting guide in the manual. Here are some codes related to..."
Chance Miller
Chance Miller posted an answer for this Galaxy Computers & Internet:
"Older machine yes? may be easier to get a replacement part from a junker? Lot's of these..."
Chance MillerChance Miller posted an answer for this Baby Lock Sewing Machines:
"This can be a tricky adjustment, Make sure you have the correct needles inserted..."
Chance MillerChance Miller posted an answer for this Sewing Machines:
"That's an Elna... sounds like it's time for a cleaning oiling and adjustment. Also it..."
Chance MillerChance Miller posted an answer for this Sewing Machines:
"Get and read the manual on proper threading and set up of the machine. There are so many..."
Chance MillerChance Miller posted an answer for this Sewing Machines:
"WOw Paying attention would have been best...Thread machine properly of course, insert..."
Chance MillerChance Miller posted an answer for this Sewing Machines:
"Machine has built in temprature breaker on the motor that resets itself when it cools off...."
Chance MillerChance Miller posted an answer for this Toyota Sewing Machines:
"Sounds like a boss jam? Recalibrate to needle one, Reset for each mfg is..."
Chance MillerChance Miller posted an answer for this Elna Sewing Machines:
"IF the presser foot lever is not working, the linkage may be broken and needs to be..."
Chance MillerChance Miller posted an answer for this Husqvarna Sewing Machines:
"These are very well built machines. I will always suggest having a trained professional..."
Chance MillerChance Miller posted an answer for this Sewing Machines:
"I am not familiar with a feed sticker? Can you offer more information on your machine and..."
Chance MillerChance Miller posted an answer for this Brother Sewing Machines:
"The needle threader is a very delicate item on the machine. What is your question? As..."
Chance MillerChance Miller posted an answer for this Janome Sewing Machines:
"Stitch Plate sensor is dirty or needs to be replaced. Cheers, Embroidery Services San..."
Chance MillerChance Miller posted an answer for this Singer Sewing Machines:
"These are repairs best left to a professional. Parts are not available to you unless you..."
Chance Miller
Chance Miller posted an answer for this Brother CS-6000 Computerized Sewing Machine:
"The Black bobbin case more than likely is not installed correctly. The machine just won't..."
Chance MillerChance Miller posted an answer for this Brother Sewing Machines:
"If screen is garbled and unreadable, you may need to have a trained professional look at..."
Chance MillerChance Miller posted an answer for this Sewing Machines:
"Google the machine information and check over results. Cheers, Embroidery Services San..."
Chance MillerChance Miller posted an answer for this Sewing Machines:
"You have the machine set for blind hem stitching. Change the stitch selector to stretch..."
Chance Miller
Sewing Machines 370 answers
Irons 30 answers
Cars & Trucks 13 answers
Washing Machines 11 answers
Computers & Internet 5 answers
Televison & Video 5 answers
Heating & Cooling 2 answers
Audio Players & Recorders 2 answers
Refrigerators 2 answers
Vacuums 2 answers
Electrolux 30"...
Samsung Galaxy Mega 6.3