1
John B. Zorich posted an answer for this 1994 Toyota Previa:
"My 96 low rumble was caused by the U joints on the drive shaft. The front drive shaft..."
John B. ZorichJohn B. Zorich posted an answer for this 1994 Toyota Previa:
"My 1996 has had the P040 code (EGR insufficient flow) for years and years. I suspect the..."
John B. Zorich
John B. Zorich posted an answer for this 1991 Toyota Previa:
"I have done this with the help of my Chilton's manual. I would get one if I were you, then..."
John B. ZorichJohn B. Zorich posted an answer for this 1994 Toyota Previa:
"Did the anti-theft system get activated? Clear it with the key by locking then unlocking..."
John B. Zorich
John B. Zorich posted an answer for this Toyota Cars & Trucks:
"I replaced my drive shafts on my 96 Previa LE SC, so I know it can be done. If you don't..."
John B. Zorich
John B. Zorich posted an answer for this 1996 Land Rover Discovery:
"I had the same problem on my 96 Discovery. It turns out, if the low end of the new TPS..."
John B. Zorich
John B. Zorich posted an answer for this 1997 Land Rover Discovery:
"My 96 Discovery has a plastic baffles inside the valve cover port that connects to the..."
John B. ZorichJohn B. Zorich posted an answer for this 1996 Land Rover Discovery:
"Probably the same set up as my 96 Discovery, Automatic transmission. The emergency brake..."
John B. Zorich
John B. Zorich posted an answer for this 1996 Toyota Previa:
"I have a '96 Previa LE/SC all trac. Had rough idle at stop light, especially with A/C on...."
John B. Zorich
Cars & Trucks 9 answers
