jnissen posted an answer for this Rheem 40 Gallon FVR NATGAS Low WATER HEATER 6YR 22V40SF:
"On the later Honeywell gas valves there is a microprocessor that will monitor many sensors..."
jnissen posted a question about Thermador Ovens:
"thermador dim"
jnissen posted an answer for this KitchenAid KP2671 Professional 6 Series Stand Mixer:
"Similar issue with mine. The snap ring above the accessory attachment pin had come out of..."
jnissen posted an answer for this Kohler Toilet Seat - Elongated Front Quiet Close Quick Release - Cachet by:
"Harvest Gold? Do you still have avocado appliances as well? Actually the advise to call..."
jnissen posted an answer for this Kohler Home:
"I have one of these toilets as well. The water exits below the water line so if you plunge..."
jnissen posted an answer for this Hoover 24 in. DT999 Free-Standing Dishwasher:
"The diverter valve at the bottom of the machine is a valve that diverts water to the..."
jnissen posted an answer for this KitchenAid Dishwashers:
"The diverter valve at the bottom of the machine is a valve that diverts water to the spray..."
jnissen posted an answer for this Cars & Trucks:
"Did it have good or fair compression before the repair? Could be poor work or improper..."
jnissen posted an answer for this Kenmore HE3 Steam 7.2 cu. ft. Super Capacity Electric Dryer:
"Dryer has a moisture sensor that detects the clothes are dry so it shuts off earlier. If..."
jnissen posted an answer for this Kenmore HE3 Steam 7.2 cu. ft. Super Capacity Electric Dryer:
"Dryer has a moisture sensor that detects the clothes are dry so it shuts off earlier. If..."
jnissen posted an answer for this Office Equipment & Supplies:
"What type of machine?"
jnissen posted an answer for this Ricoh AficioSP 5100N Laser Printer:
"This is a memory allocation routine that runs on an ARM7 processor used in embedded..."
jnissen posted an answer for this Bernina Artista 170:
"The Dynex adapter does not have any numbers on it. It was the one that is only about a..."
jnissen posted an answer for this Bernina Artista 180:
"HASP or security device dongles were used on earlier Artista software. If your machine..."
jnissen posted an answer for this Bernina Artista 180:
"Use a USB to Serial converter cable and the free download "Artlink" from bernina."
jnissen posted an answer for this Bernina Artista 180:
"I want to transfer a pattern from my computer to my Artista 180."
jnissen posted an answer for this Bernina Artista 180:
"Been there... Most often was due to improper tension settings and the threading of the..."
jnissen posted an answer for this Bernina Artista 180:
"A birds nest underneath project. Have gone through all the required steps to fix the..."
jnissen posted an answer for this Bernina Artista 180:
"Could be a lot of reasons. Normally for simple straight stitches it should fly. I'd take..."
jnissen posted an answer for this Bernina Artista 180:
"when depressing the foot controller on my Bernina Atista 180the machine stitches at either..."
jnissen posted an answer for this Bernina Artista 180:
"Just use the free download software from Bernina called Artlink. I used it along with a..."
jnissen posted an answer for this Bernina Artista 180:
"My Bernina Artista 180E no longer works with updated Windows. Is it possible to upgrade..."