I enjoy helping people help themselves
Robert Pagliaroli posted an answer for this Kirby Vacuums:
"Check to make sure the magnet on the roller is on the side with the coil (this activates..."
Robert Pagliaroli posted an answer for this Hoover Vacuums:
"The hose for this model when torn can only be replaced. With a torn hose you will loose..."
Robert Pagliaroli posted an answer for this Hoover Steam Vac Dual V w/ SpinScrub Vacuum:
"on the front hood there is a round port connection to open and then insert and turn to..."
Robert Pagliaroli posted an answer for this Hoover SteamVac F5914-900 SpinScrub Upright Vacuum:
"When in the upright position, they will turn off. However, if they do not turn when on the..."
Robert Pagliaroli posted an answer for this Hoover Company Wind Tunnel U53019 Upright Vacuum:
"Lock the vac in the upright position and then tilt the unit back off the front wheels, it..."
Robert Pagliaroli posted an answer for this Hoover SteamVac F5914-900 SpinScrub Upright Vacuum:
"With this model, check all hose connections and recovery tank lid. if you have good..."
Robert Pagliaroli posted an answer for this Hoover U59 WindTunnel TurboPOWER Bagged Upright Vacuum:
"Check for clogs in the hose and suction path. Replace bag and filters. The vac is designed..."
Robert Pagliaroli posted an answer for this Hoover SteamVac F5914-900 SpinScrub Upright Vacuum:
"Use a Hoover nozzle cleanout tool Part # 39514003"
Robert Pagliaroli posted an answer for this Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum:
"If you are referring to the front nozzle area, Hoover has made a tool called a nozzle..."
Robert Pagliaroli posted an answer for this Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum:
"The easiest way is to lock the vacuum in the upright position and then tilt back slightly..."
Robert Pagliaroli posted an answer for this Hoover Floormate H3000 Upright Wet/Dry Vacuum:
"this is the original Hoover Floormate, and may have a few different things that may be..."
Robert Pagliaroli posted an answer for this Hoover Vacuums:
"The filter is at the top of the recovery tank (dirty water tank), should be replaced when..."
Robert Pagliaroli posted an answer for this Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum:
"The drive pulley can be replaced, however I would only recommend being service by a vac..."
Robert Pagliaroli posted an answer for this Hoover Vacuums:
"The part number for the single belt is 38528040 or a 2 pack 40201190, the belt number..."
Robert Pagliaroli posted an answer for this Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum:
"I would need more information about your problem. If you are referring to the brush block..."
Robert Pagliaroli posted an answer for this Tornado CV 30 Vacuum:
"Overheating can be caused by several things. First check the bag and filters, clean or..."
Robert Pagliaroli posted an answer for this Tornado CK 14/1 QD Vacuum:
"The belt on this model series will break if the roller stops spinning or spins with high..."
Robert Pagliaroli posted a question about Televison & Video:
"Samsung 22 inch tv will not turn on"
Robert Pagliaroli posted a question about Televison & Video:
"Samsung tv 22 inch no power on"
Robert Pagliaroli posted an answer for this Televison & Video:
"Could you provide more information, I have service manuals, but need your model number to..."
Robert Pagliaroli posted an answer for this Audio Players & Recorders:
"Have you checked for fuses in the output circuits? Other electronic causes could be the..."
Robert Pagliaroli posted an answer for this Hoover SteamVac F5914-900 SpinScrub Upright Vacuum:
"Based on your desription, I believe the issue is with the resevoir (the valve under the..."
Robert Pagliaroli posted an answer for this Hoover SteamVac F5914-900 SpinScrub Upright Vacuum:
"not dispensing liguid normally, but does dipense when wand is installed"
Robert Pagliaroli posted an answer for this Hoover SteamVac F5914-900 SpinScrub Upright Vacuum:
"This sounds like the hose connection valve is bad. The part is about $12 -15. I would take..."
Robert Pagliaroli posted an answer for this Hoover SteamVac F5914-900 SpinScrub Upright Vacuum:
"My F7458-900 leaks water when using upholstery tools I do have good suction, but water..."
Robert Pagliaroli posted an answer for this Hoover Tempo Widepath Upright Vacuum - Blue:
"If you are refering to the roller underneath, the belt nees to be replaced. Simply remove..."
Robert Pagliaroli posted an answer for this Hoover Tempo Widepath Upright Vacuum - Blue:
"I have a Hoover Tempo Widepath Bagged Upright Vacuum whose propellers are not spinning,..."
Robert Pagliaroli posted an answer for this Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum:
"This model shown is a 5900 series. I will base my answer from this. First remove the lower..."
Robert Pagliaroli posted an answer for this Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum:
"how do i insert the hose to the tank , so that i can use the upolstery conector."
Robert Pagliaroli posted an answer for this Kenmore Vacuums:
"I would take it to a qualified repair shop for this type if repair. Without knowing the..."