Mike Duncan posted an answer for this Televison & Video:
"Find an old or blank tape that you know to be clean and just let it run for 15 min or a..."
Mike Duncan posted an answer for this Cambridge Audio Azur 540A Amplifier:
"The other possibility is that you have blown out one or both of the outputs on those..."
Mike Duncan posted an answer for this Cambridge Audio Azur 540A Amplifier:
"my amp states overload protection and no sound from both front speakers but all other..."
Mike Duncan posted an answer for this Audio Players & Recorders:
"If it is working fine and then shuts off and gets hot in just a matter of seconds then you..."
Mike Duncan posted an answer for this Audio Players & Recorders:
"Go to the Peavey web site and then to their support area. Email support and they should be..."
Mike Duncan posted an answer for this Denon AVR-1603 Receiver:
"You will need an adapter amp which converts the tiny tiny signal from a magnetic phono..."
Mike Duncan posted an answer for this Pioneer DEH-P4000UB CD Player:
"I would hazard to guess that you are running a speaker "ohm load" that is less than 4 ohms..."
Mike Duncan posted an answer for this Audio Players & Recorders:
"If you unplug the unit from the wall plug for about 10 minutes and try it again and you..."
Mike Duncan posted an answer for this Pioneer VSX-1018AH-K Receiver:
"If this is a new hookup be sure this amp doesn't have pre-out/main-in jacks that may need..."
Mike Duncan posted an answer for this Kenwood 1000W Class D Bridgeable Mono Amplifier with Variable Crossover - Black/Blue:
"Maybe, but my question would be will the truck alternator carry the load without frying...."
Mike Duncan posted an answer for this Teac CD Player/Cassette Deck Combo Shelf System:
"I'm not sure why you are unable to see the usb device, but I am surprised you are using a..."
Mike Duncan posted an answer for this Technics Audio Players & Recorders:
"Sounds like it may be fried. Test the output transistors and the predriving circuit for..."
Mike Duncan posted an answer for this Audio Players & Recorders:
"Go into the sound properties by right clicking on the speaker icon at the lower right of..."
Mike Duncan posted an answer for this Audio Players & Recorders:
"The old pioneer car radios solved this problem by supplying the battery power to the radio..."
Mike Duncan posted an answer for this Audio Players & Recorders:
"I doubt it. Sounds like it is going into protection due to bad output transistors or some..."
Mike Duncan posted an answer for this Roland Audio Players & Recorders:
"If your transformer is fried then you will have to replace it of course, but if it has..."
Mike Duncan posted an answer for this Audio Players & Recorders:
"It seems that your car stereo thinks that the phone is off the hook and that you are using..."
Mike Duncan posted an answer for this Kenwood Car Audio & Video:
"You have two power leads bringing battery power into the radio. One is switched off when..."
Mike Duncan posted an answer for this Jensen LXA300 Car Audio Amplifier:
"If it only worked for about a month, then you probably did not get your speaker load..."
Mike Duncan posted an answer for this Jensen LXA300 Car Audio Amplifier:
"You must have an amp that is designed for a 2 ohm load. If it isn't then you will fry your..."
Mike Duncan posted an answer for this Marantz SR-7000 Receiver:
"Most often it is due to improper speaker loading. In other words, it needs to have from 4..."
Mike Duncan posted an answer for this Car Audio & Video:
"You haven't said what is wrong with the unit. If it isn't turning on then I would be..."
Mike Duncan posted an answer for this Car Audio & Video:
"If you could tell the brand and model number I might be able to help. A picture of the..."
Mike Duncan posted an answer for this Audio Players & Recorders:
"Sounds like you might have a problem in the output stage and that it hasn't completely..."
Mike Duncan posted an answer for this Car Audio & Video:
"It sounds like your stereo is working properly. I've never seen a car stereo that was..."
Mike Duncan posted an answer for this Audio Players & Recorders:
"Have you tried manualsparadise.com or eserviceinfo.com or even partstore.com. Any of these..."
Mike Duncan posted an answer for this Audio Players & Recorders:
"I'll try to help you step by step from your question. My answers will be in all caps. Here..."
Mike Duncan posted an answer for this Kenwood Audio Players & Recorders:
"Might be an output relay with a bad contact. If you have an oscilliscope you will see..."
Mike Duncan posted an answer for this Technics Audio Players & Recorders:
"Make sure your turntable is grounded to your amp and that may take care of your problem...."
Mike Duncan posted an answer for this Audio Players & Recorders:
"You can get a wiring diagram for a KD-G300 at http://www.eserviceinfo.com/service..."
Mike Duncan posted an answer for this Sony STR-DE485 Receiver:
"Usually you hook your equalizer between the pre out and main in RCA jacks and then open..."