Press enter to search.
Wayne Buss posted an answer for this Bernina Sewing Machines:
"Not a problem you should attempt
take it to an authorized dealer/technician"
"Check the hook/shuttle to see if it is damaged
or check the race, the metal track that..."
"Decorative quilt designs such as lines, feathers, circles etc.
are created using a..."
"Can you describe problem
"You will have to remove or tip back the lid to get at the bobbin winder, then use a..."
"Bernina is unique and uses only Bernina feet with the exception of an adapter foot and..."
"Above the Zig Zag dial there are small lights
on either side there are two vertical..."
"Requires calibration by a qualified technician
sometimes the buttonhole foot is faulty,..."
"The contacts in the foot control are likely broken
a qualified Bernina Technician should..."
"Are you using the correct bobbins? Is the bobbin nearly empty, sometimes the sensor goes..."
"Without taking off the covers, Pretty much only the shuttle"
"What model? 217? 117? 950?"
"Is your needle in backward, are you using correct needles,
if so shut off machine,..."
"Replace the needle threader itself, there is no good or easy way to straighten the..."
"Likely the foot control was dropped and the contact points are damaged. It is tricky to..."
Wayne Buss posted an answer for this Baby Lock Sewing Machines:
"Have you tried to use the wire looper threaded to get the thread through the looper?
"Be sure you are using a standard needle and that you are inserting them in all the way..."
Wayne Buss posted an answer for this Baby Lock Ellure:
"Definitely a problem to be adjusted by a qualified Babylock technician"
"Until the foot control overheats. Be sure you are running the machine at full speed when..."
"Likely the shuttle is damaged, check to see if any nicks on the shuttle if so polish them..."
"Be sure there is no damage to the shuttle/hook that series used a fibre (composite inner..."
"The needles can be replaced but need to be secured by riveting and or epoxy glue. Most..."
"Likely the threads are stripped on the screw of the hoop
you should replace the long..."
"There is a small black plastic finger that engages the needle bar and if it gets stuck..."
"Be sure you do not have a bent needle and or a damaged shuttle, if the latter, one should..."
"Try using a Metallica or top stitching needle
also check that the needle is inserted all..."
Wayne Buss posted an answer for this Bernina 1008:
"Sometimes the foot control switching unit is faulty. Is it an electronic foot control? ..."
Wayne Buss posted an answer for this Bernina Virtuosa 150:
"Never been serviced? Whoops, as an old tech, I'm not surprised, how often do you oil your..."
"Can I assume you mean the foot control does not work or do you mean the machine will not..."
"Is the bobbin winder engaged? Likely this is the problem
if not contact me
"You can tell a Bernina bobbin by the number of holes "7"
9mm diameter and 6mm width
Load more activity...
21,793 people helped
View all achievements