vic richards posted an answer for this Westinghouse 32-inch Led-lcd Tv - 720p Hdtv Television Set:
"Go to the menu look for the input settings make sure it is set for cable not air. There..."
vic richards posted an answer for this Televison & Video:
"Replace the speakers. I have had to do this on two lgs one was still under the warenty. If..."
vic richards posted an answer for this Toshiba 42H81 42" Rear Projection Television:
"Sounds like convergence should replace chips marked Q 751 and Q752 part numbers (..."
vic richards posted an answer for this Toshiba 42H81 42" Rear Projection Television:
"I have a rear projection Toshiba 42 inch and the convergence of the colors seems to have..."
vic richards posted an answer for this Mitsubishi WD-52525 52" Rear Projection HDTV:
"the flashing green light wont stop flashing, so i cannot power up TV."
vic richards posted an answer for this RCA 32V420T 32" TV:
"I attempted to see if I could get the menu to adjust the screen because the bottom of..."
vic richards posted an answer for this RCA 32V420T 32" TV:
"is there a menu on front of tv if so push it then use the chan up/down and vol up/down to..."
vic richards posted an answer for this Toshiba 43H70 43" Rear Projection Television:
"where can I get schematics for model 43H70"
vic richards posted an answer for this Toshiba 43H70 43" Rear Projection Television:
"go to www.fixdevice.com got one free pdf file."
vic richards posted an answer for this Sony Televison & Video:
"If you know that the convegance IC are bad then I would replaece them frist and see if..."
vic richards posted an answer for this Sony KP-51WS510 51" Rear Projection HDTV-Ready Television:
"dont know if they cross or not but do know that (Mat electronics has the stk 392-560 fo..."
vic richards posted a question about Vizio L37 Television:
"no picture power ups blacklights work no menu no sound power supply has 12 and 5 volts..."
vic richards posted an answer for this Mitsubishi WD-52525 52" Rear Projection HDTV:
"Probley should check the DM board for bad capastors. DM board is inside of a metal case..."
vic richards posted an answer for this Panasonic Televison & Video:
"frist you need to check the fuse it is inside of tv by the power cord looks like this..."
vic richards posted an answer for this iLO IWT3206 TV:
"you can put in a new tuner or if you are good you might be able to fix the one you have..."
vic richards posted an answer for this iLO IWT3206 TV:
"you may need to check the input setting on the tv in the menu. It should have a setting..."
vic richards posted an answer for this Sony FD Trinitron WEGA KV-32FS120 32" TV:
"Need to check D647 which is a diode sony part number 6-500-567-01 even if it checks good..."
vic richards posted an answer for this Sanyo DS31590 31" TV:
"Sounds like you have bad solder joints on the vertical ic which should be numbered IC501..."
vic richards posted an answer for this RCA 27V514T 27" TV:
"Need to check T 401 for open Q 405 also could be a bad flyback transisformer."
vic richards posted an answer for this Zenith A25B33W 25" TV:
"sounds like the little button switches are leakey they are mounted to the board and are..."
vic richards posted an answer for this JVC AV-21meu 21" TV:
"If thhe ic has a crak that you can see then it is no good replace the ic If looks good..."
vic richards posted an answer for this Sanyo Televison & Video:
"My book says no audio, storm damage need to replace ic 3601 (CXA1279AS part number 409 279..."
vic richards posted an answer for this Sony KV-27FS13 27" TV:
"sound like you have bad soulder conections on the board. you need to look for tht ans..."
vic richards posted an answer for this JVC Televison & Video:
"vertical problem need to check for bad solder joints on vertical ic would be helpfull if..."
vic richards posted an answer for this Acer Aspire 5100 Notebook:
"you need to take the thing apart and check the plug on the board to make sure that it is..."
vic richards posted an answer for this Akai CFTD2083 20 in. TV/VCR/DVD Combo:
"look on the back of tv for a 1800 number to call for help and if there is one call they..."
vic richards posted an answer for this Philips Televison & Video:
"Sounds like a flyback problemto me i have a tv here at home that does that. My repair book..."
vic richards posted an answer for this Philips Magnavox MWC20T6 TV:
"Frist of all the tv is made by Funai the next thing is it is very hard to get parts from..."
vic richards posted an answer for this Sansui DTV1900 TV:
"if it is not digital all ready the you will need a digital box for it. If you already..."
vic richards posted an answer for this Emerson Televison & Video:
"check the sleep timer make sure it is off or set to 00.00 could be set for turning tv off..."