1I enjoy a lot fixing priners problems
docukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Try to repkace xero"
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Try whit admin enter 1111 done."
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Check yor sd card. Just reeplace it or change for another new sd card"
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Problem betwen firewire pwbs. Unplug and an plug firmly the firewire cable. Then turn on..."
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Hy the problem is because some chip is wrong, may be chinese change it one for one until..."
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Hy the problem is because some chip is wrong, may be chinese change it one for one until..."
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"There is a priblem at the termostat. Change it"
docukaaf
docukaaf posted an answer for this Xerox WorkCentre 7120 Color Copier Printer 20 ppm, WC7120":
"IOT speed mismatch execute nvm read write 700-600, 700-601, 700-602 the 3 values match?"
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Black toner dispense fault. Check for obstructions on dispensation of black toner to the..."
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"There is aproblem whith the transfer belt unit"
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Just check that the fuser exit sensor is ok. If not try to change it or the complete fuser"
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"The fuser reach one overtemperature Enter diagnostics NVM dc 131 and fix (744-220)=0 and..."
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"There is a problem with mcu. Try reconect mcu plugs"
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Select system conf"
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Your xerox 700 has problems with laser scan YM drive control. Check that the connectors on..."
docukaaf
docukaaf posted an answer for this Xerox Phaser 3200MFP/N Laser Printer:
"The laser unit is not working. It has to be changed"
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Some files on fiery disk drive are corrupted or missing. Try reloading SW on it whit one..."
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"No it has lot of paper and dirty powder."
docukaafdocukaaf posted an answer for this Xerox Office Equipment & Supplies:
"Try shorting the chip inside the fuser module. It has three fuses and when its life end,..."
docukaaf
docukaaf posted an answer for this Xerox DocuColor 12 Printer:
"Yor probles is caused for a pour conection from the fiery with the printer. Check..."
docukaaf
docukaaf posted an answer for this Xerox Phaser 7700 Laser Printer:
"Error 11, laser unit polygon motor failure. If this fault reoccurs 3 times successively..."
docukaafdocukaaf posted an answer for this Xerox DocuColor 12 Printer:
"This problem is common when heavyweight paper is fed from the tray long edge first. and..."
docukaafdocukaaf posted an answer for this Xerox DocuColor 12 Printer:
"Your docucolor has a problem whit the transfer belt. It may be damaged or out of position...."
docukaafdocukaaf posted an answer for this Xerox Phaser 4500 Printer:
"Hy, this problem is caused because the print cartridge is out of range. try changing with..."
docukaafdocukaaf posted an answer for this Xerox Phaser 7700 Laser Printer:
"Change the magenta developer, maybe some ink was not original"
docukaafdocukaaf posted an answer for this Xerox Phaser 7700 Laser Printer:
"Hy the problem is: You have to clean the 2nd BTR and the transfer belt cleaner. There is a..."
docukaafdocukaaf posted an answer for this Xerox DocuColor 12 Printer:
"Well that problem is because there is not enought oil on the fuser roll. The problem is..."
docukaafdocukaaf posted an answer for this Xerox DocuColor 12 Printer:
"10.356 external heat roll retract failure. Try to release the external heat roll maybe..."
docukaafdocukaaf posted an answer for this Xerox DocuColor 12 Printer:
"The low toner sensor detects that is not cyan toner for a period of 8 minutes. Probably..."
docukaafdocukaaf posted an answer for this Xerox DocuColor 12 Printer:
"4.332 belt position failre as you can see the belt edge sensor sa detected that the drive..."
docukaafdocukaaf posted an answer for this Xerox DocuColor 12 Printer:
"The problem is because it has a bad or missing conection with the fiery. Try to reconect..."
docukaaf
Office Equipment &... 36 answers
