2Expert powertool technician with well over 10 years experience.
Craig Becker posted an answer for this Dewalt Drills:
"Make sure the speed selector lever on the top of the tool is all the way in gear, and the..."
Craig Becker
Craig Becker posted an answer for this Makita Saws:
"It's on the righthand side of the saw at the hinge area in the back. If that is unlocked..."
Craig Becker
Craig Becker posted an answer for this Dewalt 18 Volt Cordless Reciprocating Saw- Sawzall:
"check to see if the lever is worn or bent. If so it won't make the sliding piece move..."
Craig BeckerCraig Becker posted an answer for this Black & Decker Drills:
"your trimming a lot of hedges if you need to replace the brushes. I'd suspect other..."
Craig BeckerCraig Becker posted an answer for this Drills:
"I'd check basics first. Cord, switch, brushes."
Craig BeckerCraig Becker posted an answer for this Drills:
"Why do you need more junk mail? Your reciept should cover any warranty."
Craig BeckerCraig Becker posted an answer for this Drills:
"I think they're obsolete. batterypakrebuilders.com had some in the past you could send him..."
Craig BeckerCraig Becker posted an answer for this Drills:
"not knowing what drill you have it's hard to answer, but usually the speed selectors have..."
Craig BeckerCraig Becker posted an answer for this Drills:
"batterypakrebuilders.com can rebuild your batteries."
Craig BeckerCraig Becker posted an answer for this Drills:
"on what"
Craig BeckerCraig Becker posted an answer for this Drills:
"buy and install service kit 14-46-5338. ereplacemantparts.com or toolpartsdirect.com"
Craig Becker
Craig Becker posted an answer for this Makita 5402NA 16-5/16" Beam Cutter Circular Saw:
"Not sure what you mean. It has a safety button on it that you press before you can pull..."
Craig BeckerCraig Becker posted an answer for this Saws:
"You'll have to tell all of us what tool you have."
Craig BeckerCraig Becker posted an answer for this Saws:
"some ridgid parts are available at toolpartsdirect.com and ereplacementparts.com"
Craig Becker
Craig Becker posted an answer for this Makita Switch For Jr3000v Reciprocating Saws 651314-6:
"White and black from cord go to line (doesn't matter what side it's not polarity..."
Craig Becker
Craig Becker posted an answer for this Milwaukee Tool 10 Amp Sawzall Plus with Quick - Lok Cord:
"No. Check the power cord and see if it has full voltage through it. If so pull the motor..."
Craig Becker
Craig Becker posted an answer for this Makita 18 Volt Lxt Bjr182 Recip Reciprocating Saw Gift:
"seperate the handle halves and see if the trigger lock is hanging up. If not replace the..."
Craig BeckerCraig Becker posted an answer for this Milwaukee Tool Saws:
"Take the clamp apart by removing the spiral ring that holds the collar on and then remove..."
Craig BeckerCraig Becker posted an answer for this Dexter Saws:
"eurton electric"
Craig Becker
Craig Becker posted an answer for this Skil 7 1/4" Magnesium "Mag 77" Wormdrive Saw With Twist Lock Model # SHD77M 72:
"check to see if you have a colapsed brush spring. When they get overloaded it heats the..."
Craig Becker
Craig Becker posted an answer for this Craftsman Crafstman Evolv 18v Cordless Drill Driver / Circular Saw 5 1/2" Combo Kit:
"If you can get it... try searspartsdirect.com"
Craig Becker
Craig Becker posted an answer for this Makita BUB182Z 18V LXT Li-Ion Cordless Blower Tool only:
"Go to makitausa.com. They're pretty good about getting you the info. you need. The contact..."
Craig Becker
Craig Becker posted an answer for this Skilsaw 5150 Circular Saws:
"Hard to say without seeing it but....wrong sized blade, bent blade, clamp missing or..."
Craig Becker
Craig Becker posted an answer for this Ridgid 18v Drill R86007 Rigid:
"bad battery. cells won't hold a charge. that's what it sounds like to me...."
Craig BeckerCraig Becker posted an answer for this Skil Saws:
"loosen it more before you put the blade in."
Craig BeckerCraig Becker posted an answer for this Hilti Drills:
"Hilti.com has parts breakdowns or if not it has a contact number for Hilti so you can call..."
Craig BeckerCraig Becker posted an answer for this Drills:
"Check the motor brushes"
Craig BeckerCraig Becker posted an answer for this Drills:
"sounds like it needs a rebuild kit. Hilti.com for parts or to contact Hilti to see if you..."
Craig BeckerCraig Becker posted an answer for this Hilti Drills:
"It sounds like it's way overdue for a rebuild. That includes orings and grease and maybe..."
Craig BeckerCraig Becker posted an answer for this Drills:
"bad power cord? Brushes getting low?"
Craig BeckerCraig Becker posted an answer for this Drills:
"check the motor brushes first then the power cord. Two quick checks!"
Craig Becker
Drills 68 answers
Saws 59 answers
Air Tools & Compressors 14 answers
