General suitability for birding
A) You have not stated to which model of Zhumell scope (of which I have never heard) this refers, but the new Swarovski has not only superb optical quality, but also a binocular eyepiece.B) Thank you for stating the blindingly obvious in the second part of your query, which appears to be in response to some previous interaction between yourself and Fixya, the details of which you have not indicated.
Do the barrels on my pentax 20x60 pcfv binoculars
NO, I do not think the actual barrels do at all, however often the inserts in the ends that hold in the lenses may, it depends on manufacturing process. regardless of how they are constructed and even if initially the barrels did detach, they most often however are sealed at manufacture to stop the ingress of moisture and keep alignment.
The vertical lock knob on my Meade ETX-70AT was
You might be able to drill a hole through the plastic knob and use a washer and a bolt to hold the screw tight. Or do something like this fix:
http://www.schlatter.org/Dad/Astronomy/etx90decknb.htm
Need an erecting diagonal for tasco 11TR
Why? are you going to use the scope for terrestrial viewing -- bird watching etc etc
You do not need it for astronomical viewing--- no up or down in outer space.
Here are some:
http://www.astronomics.com/main/Image_Erecting_Prisms.asp/catalog_name/Astronomics/category_name/EDNECFUVSRWS8KLNTU5E38XSE1/Page/1
These are usually sold in 1.25 inch size-- measure the hole in the focuser.
How do I collimate my
Those are for the primary mirror there are also 3 screws for the secondary mirror--
Watch this video--
http://www.andysshotglass.com/Collimating.html
I just purchased a Meade
You stick it into the focuser and tighten the small thumb screw. Then you put your eyepiece into the diagonal.
BUT! why would you do this? You only use this for terrestrial viewing not for night time Astronomy.
I bought an old Tasco 11TR reflector telescope at
Eyepieces are available from many on-line retailers -- measure the hole in the focuser. Eyepieces come in 3 sizes, .965, 1.25, and 2 inch.
The .965 is very hard to find. Here are two retailers
http://www.agenaastro.com/
http://stores.ebay.com/Telescope-Warehouse
All of Tasco's manuals are on this web site:
http://www.tasco.com/pages/instruction-manuals/
The spring connecting the clock
You may be able to buy a replacement drive from a Zhumell dealer?
Here is one. Contact them and find out.
http://www.telescopes.com/telescopes/zhumell/8197+8198+8269.cfm?source=googleaw&kwid=zhumell%20telescopes&tid=exact
Need to find replacement lenses
Eyepieces can be bought at many on line retailers. Here is one, your scope probably uses the 1.25 inch size-- measure the hole in the focuser.
http://www.agenaastro.com/
I dont know how aurora 70 works
This is an EQ mount which must be polar aligned in order to be used properly. Read my tips on Equatorial mounts in my profile page-- and read this:
http://www.optcorp.com/product.aspx?pid=3050
Not finding what you are looking for?