Zeikos Popular Questions, Answers, Tips & Manuals

a) find a vendor b) visit vendor c) hand over money d) walk away with quick release. Or try Ebay or the manufacturer

The user manual to the remote control is very difficult to get by net. In case of set up codes to Emerson: 0004 0042 0049. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier. http://electrohelponline.blogspot.com/

Help on its way. I bought a Second hand Orion Or 603 Dvd/Vcr Combo but it came without a remote after tring well know companies Uneversal remotes without any help I managed to get a Oneforall 8 channel remote I took my machine to the company Games and one two three the problem was over. Thanks to Fixya and oneforall.

Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa ( http://picasa.google.com ).

Programming procedure is too much, and is not practical to type in all here by this window. For more information http://electrohelponline.blogspot.com/ Setup procedure, and setup code list to many popular remote controls are given. Pull up older posts.

Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa. Organize edit and share your photos

Make sure Windows Update service is running, then unplug and replug in your USB cable. If it doesn't automatically install the driver for it, select the option to search windows update for the driver. This should fix the problem, or you may search windows update alternative updates for a USB update. There are no drivers for this product outside of the windows USB drivers. Any website claiming there is a driver for it is more than likely offering a you a virus.

You may download a copy of the manual from here.

You will probably need to send it off to a repair facility to get it fixed. One of the lights may be out, if you cracked it it will have to be replaced.

That will depend upon which lens you have. Look on the inside of the lens cap there will be a number written like 52mm or 58mm. Once you have that you can get a stepping ring from your lens to the filters. Call us for help 864-583-6835

The Kiss X50 is called the Rebel T3 in some parts of the world. You may download the English-language T3 manual and more from here.

Try the procedures in this tip.

You may download a copy of the manual at http://www.vivitar.com/files_products/609/ViviCam_F128_Camera_Manual.pdf

If you are using a Windows Computer, when you plug in the flash drive into USB port, you should get a message on the screen that says that you have installed a new removable drive. It will ask you what you want do next and one of the options would be to copy your photos. Note which drive letter the new drive is using - if you want to copy files manually, open My Documents, select My Computer on the left side panel, and select the drive that matches your Fllash Drive. When it opens, you can open. A second window to the location where your photos are, and then just copy and paste, or drag and drop between the two windows.

Chances of recovery can be high as long as you act as soon as possible and stop using the digital camera to take more photos or videos, also keep the camera memory card in good shape (no physical damage).Then you can rely on a digital camera data recovery software to get the job done and retrieve your photos. Here shows a list of good ones working under Windows or Mac: http://www.digital-camera-recovery.com/How to perform camera photo recovery? Well, you'll need to connect the camera (mass memory card) to your computer. Then install the program to start scan & recover your files.Cheers...

Take out the whole Camera Plate. there is a plastic cap on the top of the tripoid, right by the end of your tripod extender, that comes out with a little pulling it. Now, have a look at the end of the knob housing from which your screw accidentaly came out. You will see a perfect spot in wich you need to re- insert the nut that came out. Once you do it, all you need to do is to re- insert the knob back into place, and it will "bite" the nut again at the end of the housing. Re- install the whole plate back on top of your tripod. Finally, put the plastic cap back at the top. You might need to gently tap it in. Done deal . Problem resolved ! Enjoy your tripod !

you should first see if there is a crack in the lens or if it is attached so that there is no light getting in.

You don't. The Zeikos attaches to the front of lens with a 52mm filter thread, which then attaches to the D90. If you have the 18-55mm lens, for example, this will fit onto the front of that lens, effectively converting it to a 36-110mm lens. If you have the 18-105mm lens, this won't fit onto it.This device is really intended for use with cameras that don't have interchangeable lenses. With your D90, you're much better off using another lens instead of putting this onto the front of another lens.

Hello Mrs L Poole,Download the manual here in pdf.Also,here are some video tutorials on the camera that you may find useful.Hope this helps.Thanks1Please rate this answer.

No. It's an optical fault and is either a manufacturing defect or a design flaw.

Such problems are VERY common with ALL no-name brand supplementary screw-on lenses and not entirely uncommon even on branded similar models costing vastly more and intended for a specific make and model of camera.

Supplementary lenses are simply a get-you-by compromise, they will never be anywhere near as good in terms of image quality as a lens designed to be a wide angler or telephoto from the outset but will allow you to capture image which may otherwise be unattainable without a lot of additional expense and equipment.