Zebra Computers & Internet - Page 9 - Recent Questions, Troubleshooting & Support

portal motorolasolutions com for assistance.

Hi, if the device is under warranty you should send it in for service. The battery is not user accessible on this device unless you open the device up which would void the warranty. As far as I know the battery is not even orderable from Motorola.

Download the image from Motorolla/Symbol support and put it on an SD card. Put the card in the slot underneath the keyboard. Do a cold boot and hold down the left scan button. Dock the scanner and keep holding the button. It will launch the image installer and take off on its own at which point you let go of the scan button.

ring up motorola and they will tell you.

Increase the default time-out to 5 minutes by going to: Control Panel > Power > Advanced Select On Battery power: Turn off device if not used for 5 minutes.

You get 3 different keypad models of the Motorola MC3190: - 28 Key Numeric - 38 Key Shifted Alpha - 48 Key Alpha Numeric So depending on the type of keyboard your model has, using TAB are different across these 3 keypads. Please Note: Keypad functions can be changed by an application so the mobile computer keypad may not function as described. When the FUNC button is pressed the icon "F" appears on the taskbar on WinCE devices or the icon "Blue Circle" appears at the bottom of the screen on Windows Mobile 6.1 devices. In order to use the TAB function, do the following: 28 Key Numeric - Press the blue FUNC button (Bottom right next to Power button), and press the RIGHT ARROW button. 38 Key Shifted Alpha - Press the blue FUNC button (Right side below RIGHT ARROW button), and press the RIGHT ARROW button. 48 Key Alpha Numeric - Press the blue FUNC button (Right side below ENTER button) and press the number 9 button.

We have 'pens' that we can use on the screen, so I was able to click on the 'Window' icon at the bottom left corner, select 'Settings', then 'Control Panel', and double-click on 'Volume and Sounds'. I only work with touch-screen guns, so don't know how to get there without the 'pen'... though finger nails have worked, but it's tough with a small icon in the corner like that. I don't know of any way to get it to vibrate. With our gloves, we wouldn't feel it anyway. In a warehouse, having the clicking sound loud enough means we can hear if a box is skipped or an error occurs.

You have to go to printer drivers on your Operative system, then open printer properties, general tab, you will be able to check the horizontal/vertical setting of the label there.

Try to download the driver from the internet by writing the full name/version # and install it on your laptop.. OR connect your printer to your laptop then right click on My Computer - manage - device manager.. then you can see a yellow mark, try to update it or make it update its self through internet, if not just try first one.

you need a program to do that hp has one you can check to see if your printer has one as well